# Fuse 1 Brittle parts, error 352, freezing midprint after firmware update

**URL:** <https://forum.formlabs.com/t/fuse-1-brittle-parts-error-352-freezing-midprint-after-firmware-update/43825>\
**Category:** Fuse 1/1+\
**Created:** [March 12, 2025, 3:05am UTC](https://forum.formlabs.com/t/fuse-1-brittle-parts-error-352-freezing-midprint-after-firmware-update/43825 "2025-03-12T03:05:28Z")\
**Posts on this page:** 4\
**Page:** 2

<div class="post-metadata">

**Author:** ![Andreasemilsson](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/andreasemilsson/32/21283_2.png) [@Andreasemilsson](https://forum.formlabs.com/u/Andreasemilsson)\
**Post date:** [March 20, 2025, 6:20am UTC](https://forum.formlabs.com/t/fuse-1-brittle-parts-error-352-freezing-midprint-after-firmware-update/43825/21 "2025-03-20T06:20:01Z")

</div>

We have a seperate ups for each machine and i think they hold out like 30-45min if there is a blackout. We rarely have any blackouts and if we do they are rarely longer than maybe 10-15 min. So far in 3 years they have worked flawlessly. Just a reminder that they are sucking in powder so clean them once in a while.

---

<div class="post-metadata">

**Author:** ![Mario\_Martinez](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/mario_martinez/32/21346_2.png) [@Mario\_Martinez](https://forum.formlabs.com/u/Mario_Martinez)\
**Post date:** [March 21, 2025, 5:36am UTC](https://forum.formlabs.com/t/fuse-1-brittle-parts-error-352-freezing-midprint-after-firmware-update/43825/22 "2025-03-21T05:36:48Z")

</div>

I only get 9 min.

---

<div class="post-metadata">

**Author:** ![SMute](https://avatars.discourse-cdn.com/v4/letter/s/ba8739/32.png) [@SMute](https://forum.formlabs.com/u/SMute)\
**Post date:** [March 21, 2025, 5:52am UTC](https://forum.formlabs.com/t/fuse-1-brittle-parts-error-352-freezing-midprint-after-firmware-update/43825/23 "2025-03-21T05:52:06Z")

</div>

@Mario_Martinez if you only get 9min you might want to replace the batts.

---

<div class="post-metadata">

**Author:** ![Mario\_Martinez](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/mario_martinez/32/21346_2.png) [@Mario\_Martinez](https://forum.formlabs.com/u/Mario_Martinez)\
**Post date:** [March 21, 2025, 4:59pm UTC](https://forum.formlabs.com/t/fuse-1-brittle-parts-error-352-freezing-midprint-after-firmware-update/43825/24 "2025-03-21T16:59:59Z")

</div>

Just did and they are suppposed to be higher capacity our guess is that the ups is a little worn out.

[Previous page](https://forum.formlabs.com/t/fuse-1-brittle-parts-error-352-freezing-midprint-after-firmware-update/43825.md?page=1)