I know formlabs has just moved in to the consumer market with the studio 1 but I would like to see in the future a full color resin printer for the consumer because Chinese companies are developing and shipping full color resin printer’s with 10 million colors and water soluble supports these products are the HeyGears G1x and the flashforge cj270 if formlabs can be the bamboolabs of resin printer’s then Shelly they can be the bamboolabs of full color resin printer’s it would be awesome if I don’t have to paint the prints or remove the supports by hand also the prints from these printers are all ready safe to handle because the prints are already fully cured yes the liquid resin used in these printer’s are still toxic but with formlabs new Alpha resins I am sure not only can formlabs make these new types of printers safe but also make the print quality better and make the user experience easier so I hope this reaches the r&d department of formlabs and if anyone else who agrees with this article then share your thoughts thank you for reading this article all the way through
Not sure how “on-brand” it would be for Formlabs, honestly (not until up to now, anyway, considering the debut of the the Studio1 and apparent re-alignment with pricing, so who really knows) Some kind of material jetting platform like the HeyGearsG1x or Flashforge cj270 is a pretty wide departure from their apparent traditional market focus where the value for the applications was less anchored on the “decorative” or “ornamental” stuff, and definitely priced accordingly. I’d have to wonder how much potential buyers would pay for a machine to print figurines and miniatures, because it would certainly be more expensive than a Form4, for example.
Sidebar, as a reference point, these kinds of machines have been around for a very, very long time. Stratasys acquired Objet back in 2012 and 3D Systems has been develping their Multijet since the late 90’s or early 2000’s) They’re expensive in every way: to purchase, operate, and maintain. And as far as I know, the materials aren’t nearly as performance oriented as modern mSLA/DLP/SLA photopolymers. But it’s not all bad; the Objet30 in my shop holds the concrete down quite well. It just needs a $12k print head and material that’s about $500/L to get it running parts.
Thanks for your thoughts and opinions and thank you for reading my article one thing I have noticed that these types of printers are very expensive but flashforge and heygears printers are a lot less expensive from my understanding with the HeyGears printer the cost for the printer is 4000 which is still very expensive for the average customer and the print head is 1200 so like I said still very expensive but still cheaper than the big boys flashforge and heygears is definitely leaning to the pro sumer market but it will be interesting to see where this technology will be in the next couple of years because so far HeyGears and flashforge have managed to shrink the technology down and cut the cost down so hopefully it will become cheaper and once again thank you for your input
