# From your experience, how do you use the finish kit? **URL:** \ **Category:** Support & Troubleshooting\ **Created:** [July 18, 2013, 10:23pm UTC](https://forum.formlabs.com/t/from-your-experience-how-do-you-use-the-finish-kit/281 "2013-07-18T22:23:44Z")\ **Posts on this page:** 1\ **Showing post:** 15
**Author:** ![BillFarrior](https://avatars.discourse-cdn.com/v4/letter/b/aeb1de/32.png) [@BillFarrior](https://forum.formlabs.com/u/BillFarrior)\ **Post date:** [September 27, 2013, 12:31am UTC](https://forum.formlabs.com/t/from-your-experience-how-do-you-use-the-finish-kit/281/15 "2013-09-27T00:31:06Z")
I’m finding that a sharpened, narrower width putty knife and a 4 oz hammer is working well to remove prints from the build platform.  With light taps, I can force the print loose without budging the rest of the finish kit.  It’s not even attached to the table.  I sharpened the putty knife in a knife sharpener, but a grinding wheel would have worked just as well. ![](https://support.formlabs.com/attachments/token/2w7zihelkxba58x/?name=006.JPG) ![](https://support.formlabs.com/attachments/token/xyj2vyeu2dtjbel/?name=003.JPG) --- _[View the full topic](https://forum.formlabs.com/t/from-your-experience-how-do-you-use-the-finish-kit/281)._