# Formlabs PA12 tough ETA

**URL:** <https://forum.formlabs.com/t/formlabs-pa12-tough-eta/46785>\
**Category:** General Discussion\
**Created:** [August 21, 2026, 8:11pm UTC](https://forum.formlabs.com/t/formlabs-pa12-tough-eta/46785 "2026-08-21T20:11:18Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Sophia\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/sophia_m/32/21969_2.png) [@Sophia\_M](https://forum.formlabs.com/u/Sophia_M)\
**Post date:** [August 24, 2026, 1:25pm UTC](https://forum.formlabs.com/t/formlabs-pa12-tough-eta/46785/2 "2026-08-24T13:25:51Z")

</div>

Hi @bigdogsteel, thanks for reaching out about this! We have indeed experienced a supply chain issue due to a spike in demand this summer, and have already implemented several measures to address this. However, this is still an ongoing process that will likely be fully resolved in September - see [this thread](https://forum.formlabs.com/t/looking-for-references-before-i-buy-a-fuse-1/46717/13) for more info.  
We sincerely apologize for the delay! Please let us know if you have any more questions or issues regarding this.

---

_[View the full topic](https://forum.formlabs.com/t/formlabs-pa12-tough-eta/46785)._