# Form3 Angled Build Plate Drip Holder

**URL:** <https://forum.formlabs.com/t/form3-angled-build-plate-drip-holder/29287>\
**Category:** General Discussion\
**Created:** [November 9, 2020, 11:58pm UTC](https://forum.formlabs.com/t/form3-angled-build-plate-drip-holder/29287 "2020-11-09T23:58:46Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![donnie](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/donnie/32/15493_2.png) [@donnie](https://forum.formlabs.com/u/donnie)\
**Post date:** [November 9, 2020, 11:58pm UTC](https://forum.formlabs.com/t/form3-angled-build-plate-drip-holder/29287/1 "2020-11-09T23:58:47Z")

</div>

My son kindly made me this build plate drip holder – The build plate has been sitting on it for about a week - It`s strong.

Not that I do much printing on the Form3 given the technical issues. But I`ll be ready to drip once the printer can print reliably.

 ![IMG_20201109_102539](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/3/3/335f4eb0d75b74430bc13f272e875fcdd61fbfa8.jpg)

 ![IMG_20201109_102454](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/e/5/e5a447d9011f6b4ce762765a9d091b11d5d44feb.jpg)

 ![IMG_20201109_102604](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/5/559a9ed285d761b5b56ac039dd1cdbe42e5c5e68.jpg)

---

<div class="post-metadata">

**Author:** ![rkagerer](https://avatars.discourse-cdn.com/v4/letter/r/439d5e/32.png) [@rkagerer](https://forum.formlabs.com/u/rkagerer)\
**Post date:** [November 10, 2020, 2:11am UTC](https://forum.formlabs.com/t/form3-angled-build-plate-drip-holder/29287/2 "2020-11-10T02:11:21Z")

</div>

Nice! Is that hand-crafted or 3D printed? Could you share the model?

Reminds me of these:

- [Form 2 Build Plate Drip Holder](http://forum.formlabs.com/t/form-2-build-plate-drip-holder/18095)
- [OPEN SOURCE RESIN SAVER - Angled Platform Holder for Form2](http://forum.formlabs.com/t/open-source-resin-saver-angled-platform-holder-for-form2/14856)

I bought one of these [https://www.ebay.com/itm/264282783213](https://www.ebay.com/itm/264282783213) and it works but yours has the advantage of angling down to one corner rather than a whole edge.

---

<div class="post-metadata">

**Author:** ![DKirch](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/dkirch/32/20300_2.png) [@DKirch](https://forum.formlabs.com/u/DKirch)\
**Post date:** [November 10, 2020, 2:16pm UTC](https://forum.formlabs.com/t/form3-angled-build-plate-drip-holder/29287/3 "2020-11-10T14:16:50Z")

</div>

This is a terrific looking design! Great job!