# Form2 resin over fill DISASTER! **URL:** \ **Category:** Form 2\ **Created:** [August 6, 2016, 10:23pm UTC](https://forum.formlabs.com/t/form2-resin-over-fill-disaster/9187 "2016-08-06T22:23:28Z")\ **Posts on this page:** 1\ **Showing post:** 17
**Author:** ![billiejean](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/billiejean/32/9236_2.png) [@billiejean](https://forum.formlabs.com/u/billiejean)\ **Post date:** [August 9, 2016, 9:20pm UTC](https://forum.formlabs.com/t/form2-resin-over-fill-disaster/9187/17 "2016-08-09T21:20:43Z")
Here is my original post if anyone cares aka “FORMLABS” > [@Resin Overflow Puke Can](http://forum.formlabs.com/t/resin-overflow-puke-can/8842): > > I have my printer for 10 days and now I have to send it back for repairs for a simple design flaw. While doing a 9 hour unattended print The rubber stopper on the Resin Cartridge either got stuck open or twisted causing the fill cycle to squirt the resin outside of the build tray fill ramp. So now the resin is dumping down the sides and back which in turn filled up the whole inside bottom of my printer completely covering the boards, glass and laser with resin. Yes it even got into the suppose… --- _[View the full topic](https://forum.formlabs.com/t/form2-resin-over-fill-disaster/9187)._