# Form2 preform volume

**URL:** <https://forum.formlabs.com/t/form2-preform-volume/11824>\
**Category:** Form 2\
**Created:** [February 10, 2017, 6:33pm UTC](https://forum.formlabs.com/t/form2-preform-volume/11824 "2017-02-10T18:33:39Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tit\_Inn\_Des](https://avatars.discourse-cdn.com/v4/letter/t/ad7895/32.png) [@Tit\_Inn\_Des](https://forum.formlabs.com/u/Tit_Inn_Des)\
**Post date:** [February 10, 2017, 6:33pm UTC](https://forum.formlabs.com/t/form2-preform-volume/11824/1 "2017-02-10T18:33:39Z")

</div>

I am designing parts to the max volume of the form2, but it is not fitting in the preform software volume. What is the design volume to fit in the preform software for the form2???

---

<div class="post-metadata">

**Author:** ![Frew](https://avatars.discourse-cdn.com/v4/letter/f/c0e974/32.png) [@Frew](https://forum.formlabs.com/u/Frew)\
**Post date:** [February 10, 2017, 6:41pm UTC](https://forum.formlabs.com/t/form2-preform-volume/11824/2 "2017-02-10T18:41:35Z")

</div>

The Form 2 build volume is 145mm x 145mm x 175mm. If your parts aren’t fitting in one go, you should check out our tutorial on [how to make things larger than your build volume](https://formlabs.com/blog/how-to-create-models-larger-than-your-3d-printers-build-volume/) 😉

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [February 24, 2017, 6:41pm UTC](https://forum.formlabs.com/t/form2-preform-volume/11824/3 "2017-02-24T18:41:36Z")

</div>

Closed on February 24, 2017, 6:41pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.