# Form2 Draft mode

**URL:** <https://forum.formlabs.com/t/form2-draft-mode/8551>\
**Category:** Feature Requests & Ideas\
**Created:** [June 10, 2016, 8:18am UTC](https://forum.formlabs.com/t/form2-draft-mode/8551 "2016-06-10T08:18:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Smilelign](https://avatars.discourse-cdn.com/v4/letter/s/e95f7d/32.png) [@Smilelign](https://forum.formlabs.com/u/Smilelign)\
**Post date:** [June 10, 2016, 8:18am UTC](https://forum.formlabs.com/t/form2-draft-mode/8551/1 "2016-06-10T08:18:02Z")

</div>

Is there any chance we can get the draft mode for the Formlabs 2? Sometimes I just need to get a print done ASAP and am not too fussed about how smooth the finish is

---

<div class="post-metadata">

**Author:** ![Randy\_Cohen](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/randy_cohen/32/1500_2.png) [@Randy\_Cohen](https://forum.formlabs.com/u/Randy_Cohen)\
**Post date:** [June 10, 2016, 2:01pm UTC](https://forum.formlabs.com/t/form2-draft-mode/8551/2 "2016-06-10T14:01:18Z")

</div>

I didn’t use it often, but I did use the 0.2mm layer setting with Clear to bang out a big print on my Form1+. Would be nice to get that capability back on the Form2…

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [June 24, 2016, 2:01pm UTC](https://forum.formlabs.com/t/form2-draft-mode/8551/3 "2016-06-24T14:01:38Z")

</div>

Closed on June 24, 2016, 2:01pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
