# Form Wash - Not starting

**URL:** <https://forum.formlabs.com/t/form-wash-not-starting/24522>\
**Category:** Support & Troubleshooting\
**Created:** [August 26, 2019, 2:06pm UTC](https://forum.formlabs.com/t/form-wash-not-starting/24522 "2019-08-26T14:06:56Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![GarrisonWahl](https://avatars.discourse-cdn.com/v4/letter/g/d07c76/32.png) [@GarrisonWahl](https://forum.formlabs.com/u/GarrisonWahl)\
**Post date:** [August 26, 2019, 2:06pm UTC](https://forum.formlabs.com/t/form-wash-not-starting/24522/1 "2019-08-26T14:06:56Z")

</div>

Form wash machine is not powering on. The green LED on the power brick is on but pressing the power button does nothing. Anything I can do to try and remedy this?

Thanks.

---

<div class="post-metadata">

**Author:** ![Walter\_Gillespie](https://avatars.discourse-cdn.com/v4/letter/w/35a633/32.png) [@Walter\_Gillespie](https://forum.formlabs.com/u/Walter_Gillespie)\
**Post date:** [August 26, 2019, 2:12pm UTC](https://forum.formlabs.com/t/form-wash-not-starting/24522/2 "2019-08-26T14:12:57Z")

</div>

Unplug and re-plug and it will work just fine. I have to do this every so often. Just a quirk in the panel.  
I even found I have to do this with the Form 2’s from time to time. The panel will freeze and you can’t use the touch method to do anything.

---

<div class="post-metadata">

**Author:** ![Walter\_Gillespie](https://avatars.discourse-cdn.com/v4/letter/w/35a633/32.png) [@Walter\_Gillespie](https://forum.formlabs.com/u/Walter_Gillespie)\
**Post date:** [August 28, 2019, 3:14pm UTC](https://forum.formlabs.com/t/form-wash-not-starting/24522/3 "2019-08-28T15:14:57Z")

</div>

There is no power button on my Form Wash machine. When you plug in the power it turns on. The button is only to change the options in running the machine.  
I’ve had the machine stall in various modes but just unplugging the power from the back and replugging it starts working again. Same with the Form 2 machines from time to time, the touch screen stops working. Re-power and off it goes working again.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [September 11, 2019, 3:15pm UTC](https://forum.formlabs.com/t/form-wash-not-starting/24522/4 "2019-09-11T15:15:06Z")

</div>

Closed on September 11, 2019, 3:15pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.