# Form Cure
**URL:** https://forum.formlabs.com/t/form-cure/16914
**Category:** General Discussion
**Created:** [January 18, 2018, 8:59pm UTC](https://forum.formlabs.com/t/form-cure/16914 "2018-01-18T20:59:59Z")
**Posts on this page:** 9
**Page:** 1
### Author:  [@Sheilarito](https://forum.formlabs.com/u/Sheilarito)
#### Post date: [January 18, 2018, 8:59pm UTC](https://forum.formlabs.com/t/form-cure/16914/1 "2018-01-18T20:59:59Z")
I just received my Form Cure and so far the curing seems to work fine but can someone please explain to me why the timer is so far off. I set it up for a 30 min cure at 60 degrees and when i came back after an hour it was only 10 min in. I know it had to heat up first but it that wasn’t the problem. I started a stop watch when the lights kicked on and at 30 min on the stop watch it had only counted down 5 min. WTH!!! So can I assume the timer is useless??
---
### Author:  [@alan1950](https://forum.formlabs.com/u/alan1950)
#### Post date: [January 19, 2018, 2:03pm UTC](https://forum.formlabs.com/t/form-cure/16914/2 "2018-01-19T14:03:49Z")
Frew reported the FC display had issues and an upgrade was in the works.
never enough time to do it right always enough time to do it over.
---
### Author:  [@liquid](https://forum.formlabs.com/u/liquid)
#### Post date: [January 20, 2018, 4:23am UTC](https://forum.formlabs.com/t/form-cure/16914/3 "2018-01-20T04:23:57Z")
How do we turn these things off? There is no switch at the back of the unit? are we supposed to just pull the plug?
---
### Author:  [@Sheilarito](https://forum.formlabs.com/u/Sheilarito)
#### Post date: [January 22, 2018, 2:37pm UTC](https://forum.formlabs.com/t/form-cure/16914/4 "2018-01-22T14:37:27Z")
Yep, It appears so. It wont even go into sleep mode like the Form Wash
---
### Author:  [@Sheilarito](https://forum.formlabs.com/u/Sheilarito)
#### Post date: [January 22, 2018, 2:38pm UTC](https://forum.formlabs.com/t/form-cure/16914/5 "2018-01-22T14:38:01Z")
Hopefully This gets an update soon.
---
### Author:  [@Frew](https://forum.formlabs.com/u/Frew)
#### Post date: [January 22, 2018, 8:14pm UTC](https://forum.formlabs.com/t/form-cure/16914/6 "2018-01-22T20:14:44Z")
Is the display visibly taking longer to count down? A video would be a big help here and I’ll forward this to our teams so that we can look into it.
---
### Author:  [@Sheilarito](https://forum.formlabs.com/u/Sheilarito)
#### Post date: [January 22, 2018, 9:01pm UTC](https://forum.formlabs.com/t/form-cure/16914/7 "2018-01-22T21:01:00Z")
yes, I will try to upload a video tomorrow. Thank You
---
### Author:  [@alan1950](https://forum.formlabs.com/u/alan1950)
#### Post date: [January 22, 2018, 9:55pm UTC](https://forum.formlabs.com/t/form-cure/16914/8 "2018-01-22T21:55:12Z")
PULLTHEPLUG PULLTHEPLUG PULLTHEPLUG!!
Not very elegant but it works for now.
---
### Author:  [@Sheilarito](https://forum.formlabs.com/u/Sheilarito)
#### Post date: [January 24, 2018, 7:59pm UTC](https://forum.formlabs.com/t/form-cure/16914/9 "2018-01-24T19:59:24Z")
I had unplugged the unit over the weekend so I think that helped. Now its only off by a couple seconds every minute, so instead of uploading a 30 min video to show that I will do a video if it starts acting like it did last week.