# Form 3 with high-temp resin and black pigment

**URL:** <https://forum.formlabs.com/t/form-3-with-high-temp-resin-and-black-pigment/28119>\
**Category:** Experimental\
**Created:** [July 1, 2020, 1:16pm UTC](https://forum.formlabs.com/t/form-3-with-high-temp-resin-and-black-pigment/28119 "2020-07-01T13:16:07Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![rkagerer](https://avatars.discourse-cdn.com/v4/letter/r/439d5e/32.png) [@rkagerer](https://forum.formlabs.com/u/rkagerer)\
**Post date:** [July 1, 2020, 7:26pm UTC](https://forum.formlabs.com/t/form-3-with-high-temp-resin-and-black-pigment/28119/2 "2020-07-01T19:26:50Z")

</div>

Scroll down to Resin Tinting [in this post](http://forum.formlabs.com/t/babyform2-3d-print-your-3d-printer/13823). I had very good results pigmenting Clear resin using the nano-dispersion I linked near the top of the page. Others have reported success using dyes intended for epoxy (search the forums).

High Temp already has an orange tint and I imagine you could darken it substantially. I’m not sure you’ll be able to get all the way to black before the opacity falls too far outside the laser profile, but if you try it let us know how it goes!

---

_[View the full topic](https://forum.formlabs.com/t/form-3-with-high-temp-resin-and-black-pigment/28119)._