# Form 3 Build Platform 2 review

**URL:** <https://forum.formlabs.com/t/form-3-build-platform-2-review/35781>\
**Category:** General Discussion\
**Created:** [March 6, 2023, 4:33pm UTC](https://forum.formlabs.com/t/form-3-build-platform-2-review/35781 "2023-03-06T16:33:33Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![agiorgitis](https://avatars.discourse-cdn.com/v4/letter/a/85f322/32.png) [@agiorgitis](https://forum.formlabs.com/u/agiorgitis)\
**Post date:** [October 1, 2023, 1:59pm UTC](https://forum.formlabs.com/t/form-3-build-platform-2-review/35781/11 "2023-10-01T13:59:34Z")

</div>

my way of washing with platform 2 is to remove the print after printing, placing just the print in wash. not the whole platform.  
this way you also use much less IPA because you keep the level low

---

_[View the full topic](https://forum.formlabs.com/t/form-3-build-platform-2-review/35781)._