# Form 2 - tank issues

**URL:** <https://forum.formlabs.com/t/form-2-tank-issues/32970>\
**Category:** General Discussion\
**Created:** [January 17, 2022, 12:50am UTC](https://forum.formlabs.com/t/form-2-tank-issues/32970 "2022-01-17T00:50:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jcamper](https://avatars.discourse-cdn.com/v4/letter/j/54ee81/32.png) [@jcamper](https://forum.formlabs.com/u/jcamper)\
**Post date:** [January 17, 2022, 12:50am UTC](https://forum.formlabs.com/t/form-2-tank-issues/32970/1 "2022-01-17T00:50:44Z")

</div>

Anyone else get these errors

 ![Screenshot_20220116-184616_Gallery](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/7/6/7687470f6f8d8782364b525e1e5457891abae92c.jpeg)  
 ![Screenshot_20220116-184542_Gallery](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/7/2/725a78085a02b79589001ba40237af377ac0eddf.jpeg)

At first I wanted 6 hours to print flexible 80a and it never started  
The tank wasn’t even trying to fill

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [July 18, 2022, 12:51pm UTC](https://forum.formlabs.com/t/form-2-tank-issues/32970/2 "2022-07-18T12:51:35Z")

</div>

This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.