# Form 1 / 1+ / 2 3rd Party Resin Settings Master List

**URL:** <https://forum.formlabs.com/t/form-1-1-2-3rd-party-resin-settings-master-list/11312>\
**Category:** Experimental\
**Created:** [September 15, 2017, 4:00am UTC](https://forum.formlabs.com/t/form-1-1-2-3rd-party-resin-settings-master-list/11312 "2017-09-15T04:00:00Z")\
**Posts on this page:** 1\
**Showing post:** 393

<div class="post-metadata">

**Author:** ![yoderkl](https://avatars.discourse-cdn.com/v4/letter/y/7ab992/32.png) [@yoderkl](https://forum.formlabs.com/u/yoderkl)\
**Post date:** [September 17, 2017, 3:42pm UTC](https://forum.formlabs.com/t/form-1-1-2-3rd-party-resin-settings-master-list/11312/393 "2017-09-17T15:42:28Z")

</div>

I just found a good article on how it works if anyone is interested (I think they are using the exact same sensor that is in the Form2):

> **[Non-contact Capacitive Liquid Level Sensing using FDC1004](https://www.hackster.io/team-protocentral/non-contact-capacitive-liquid-level-sensing-using-fdc1004-9333c7)**
>
> We used a TI FDC1004 breakout with an Arduino to measure liquid level in a bottle using the capacitance between two adhesive copper strips. By Ashwin K Whitchurch, Venkatesh Bhat, and Manikandan S.

[edit] Some more info and diagram (trying to think of ways to trick the sensor…):

 ![image](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/f/f65fb3f48b25848fb7f17c3fc89943a2bb54bb15.png)

> **[tidu736a.pdf](https://www.ti.com/lit/ug/tidu736a/tidu736a.pdf)**
>
> 942.82 KB

---

_[View the full topic](https://forum.formlabs.com/t/form-1-1-2-3rd-party-resin-settings-master-list/11312)._