# Foggy/Cloudy Optical window from the inside?

**URL:** <https://forum.formlabs.com/t/foggy-cloudy-optical-window-from-the-inside/23805>\
**Category:** Form 2\
**Created:** [June 25, 2019, 1:00pm UTC](https://forum.formlabs.com/t/foggy-cloudy-optical-window-from-the-inside/23805 "2019-06-25T13:00:41Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Joaquinpicci](https://avatars.discourse-cdn.com/v4/letter/j/f6c823/32.png) [@Joaquinpicci](https://forum.formlabs.com/u/Joaquinpicci)\
**Post date:** [June 25, 2019, 1:00pm UTC](https://forum.formlabs.com/t/foggy-cloudy-optical-window-from-the-inside/23805/1 "2019-06-25T13:00:41Z")

</div>

Why this is even happen? how do i clean it? Im gettin tired of this… this is happening at the same time too new tanks cracked again and broke… Formlabs people please before launching a new printer solve Form2 problems.

 ![IMG_9688](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/8/8607e7c4f15fef910ab408ebc10aa50898a88118.jpg) ![IMG_9690](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/c/c983b1b5302b2799d73cfab9da2cabdd1523e908.jpg) ![IMG_9689](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/3/33ada9464bad4b6c7087c75e58a826ecd4f72303.jpg) ![IMG_9687](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/f/fe63e63d5e8ceee7f78629b4aa9e9ca16e4aff72.jpg)

---

<div class="post-metadata">

**Author:** ![kpinhassi](https://avatars.discourse-cdn.com/v4/letter/k/b9e5f3/32.png) [@kpinhassi](https://forum.formlabs.com/u/kpinhassi)\
**Post date:** [July 1, 2019, 8:46am UTC](https://forum.formlabs.com/t/foggy-cloudy-optical-window-from-the-inside/23805/2 "2019-07-01T08:46:51Z")

</div>

Hey,

I’m not from Formalbs but I would like to ask about the environment the printer is located in.  
Is it located in a humidity environment?  
Did you ever got resin spill from the tank on the glass or in the front gutter?

Its seems that due to the heat produced from the machine while working with very humidity environment / resin that is located inside the machine that went through the gutter is causing to this problem. Especially if its happened every time you print.

It will also help if you can tell what resin you used.

---

<div class="post-metadata">

**Author:** ![P3D](https://avatars.discourse-cdn.com/v4/letter/p/2acd7d/32.png) [@P3D](https://forum.formlabs.com/u/P3D)\
**Post date:** [July 1, 2019, 9:25am UTC](https://forum.formlabs.com/t/foggy-cloudy-optical-window-from-the-inside/23805/3 "2019-07-01T09:25:54Z")

</div>

Just contact FormLabs support, they will provide you with instructions what to do. Our Form2’s windows fogged from the inside for no apparent reason.

---

<div class="post-metadata">

**Author:** ![kpinhassi](https://avatars.discourse-cdn.com/v4/letter/k/b9e5f3/32.png) [@kpinhassi](https://forum.formlabs.com/u/kpinhassi)\
**Post date:** [July 1, 2019, 12:42pm UTC](https://forum.formlabs.com/t/foggy-cloudy-optical-window-from-the-inside/23805/4 "2019-07-01T12:42:37Z")

</div>

What was their answer to it?

---

<div class="post-metadata">

**Author:** ![Joaquinpicci](https://avatars.discourse-cdn.com/v4/letter/j/f6c823/32.png) [@Joaquinpicci](https://forum.formlabs.com/u/Joaquinpicci)\
**Post date:** [July 1, 2019, 12:54pm UTC](https://forum.formlabs.com/t/foggy-cloudy-optical-window-from-the-inside/23805/5 "2019-07-01T12:54:58Z")

</div>

i solved it cleaning underside with IPA and pec pad towels

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [July 8, 2019, 12:55pm UTC](https://forum.formlabs.com/t/foggy-cloudy-optical-window-from-the-inside/23805/6 "2019-07-08T12:55:00Z")

</div>

Closed on July 8, 2019, 12:55pm UTC

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.
