# Flexible resin/ sensitive skin / adult toys

**URL:** <https://forum.formlabs.com/t/flexible-resin-sensitive-skin-adult-toys/12574>\
**Category:** Support & Troubleshooting\
**Created:** [March 29, 2017, 9:28pm UTC](https://forum.formlabs.com/t/flexible-resin-sensitive-skin-adult-toys/12574 "2017-03-29T21:28:14Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Frew](https://avatars.discourse-cdn.com/v4/letter/f/c0e974/32.png) [@Frew](https://forum.formlabs.com/u/Frew)\
**Post date:** [March 30, 2017, 1:52pm UTC](https://forum.formlabs.com/t/flexible-resin-sensitive-skin-adult-toys/12574/3 "2017-03-30T13:52:07Z")

</div>

Check out the [mold tutorial by @BJBenterprises](http://forum.formlabs.com/t/new-mold-tutorial-formlabs-form2-pattern-for-silicone-molds/11173/17) to see how this is often done. As @DavidRosenfeld mentioned, you probably don’t want to use the printed part natively. Often it’s best to print a mold or use a positive printed part to make a mold and then cast a silicone typically used for this sort of thing.

---

_[View the full topic](https://forum.formlabs.com/t/flexible-resin-sensitive-skin-adult-toys/12574)._