# Flexible resin print failure on. Form 1+

**URL:** <https://forum.formlabs.com/t/flexible-resin-print-failure-on-form-1/22204>\
**Category:** Form 1/1+\
**Created:** [February 7, 2019, 10:04am UTC](https://forum.formlabs.com/t/flexible-resin-print-failure-on-form-1/22204 "2019-02-07T10:04:19Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jeneva3dprint](https://avatars.discourse-cdn.com/v4/letter/j/f9ae1b/32.png) [@jeneva3dprint](https://forum.formlabs.com/u/jeneva3dprint)\
**Post date:** [February 7, 2019, 10:04am UTC](https://forum.formlabs.com/t/flexible-resin-print-failure-on-form-1/22204/1 "2019-02-07T10:04:19Z")

</div>

Hi, tried to print large model with flexible resin. Yesterday and about 70% came out. Any advice? Thinking extra supports need adding

 ![Screenshot_20190207-100319](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/d/d09b6726f1f48226bfb3976f7e91bedc614cec58.png) ![Screenshot_20190207-100312](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/4/4e1f486fa6398c23cb5cc8bad26b15b8f0429bf9.png)

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [February 14, 2019, 10:16am UTC](https://forum.formlabs.com/t/flexible-resin-print-failure-on-form-1/22204/2 "2019-02-14T10:16:11Z")

</div>

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.