# First Layher Exceeding base Problem

**URL:** <https://forum.formlabs.com/t/first-layher-exceeding-base-problem/35374>\
**Category:** Support & Troubleshooting\
**Created:** [December 16, 2022, 4:47pm UTC](https://forum.formlabs.com/t/first-layher-exceeding-base-problem/35374 "2022-12-16T16:47:03Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![Phil.O](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/phil.o/32/18990_2.png) [@Phil.O](https://forum.formlabs.com/u/Phil.O)\
**Post date:** [December 21, 2022, 11:00pm UTC](https://forum.formlabs.com/t/first-layher-exceeding-base-problem/35374/6 "2022-12-21T23:00:27Z")

</div>

Hi Reine,

I see that you were working with Jesse on this issue and the feedback was definitely passed if this is [the thread in question](https://forum.formlabs.com/t/why-are-first-layers-so-different-in-0-1-0-05mm-layer-height/35047).

I will let Jesse know about the latest development in that thread as well.

---

_[View the full topic](https://forum.formlabs.com/t/first-layher-exceeding-base-problem/35374)._