# First 3d print on form2 **URL:** \ **Category:** Projects & Prints\ **Created:** [October 31, 2016, 1:57am UTC](https://forum.formlabs.com/t/first-3d-print-on-form2/10245 "2016-10-31T01:57:44Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![chulev](https://avatars.discourse-cdn.com/v4/letter/c/9dc877/32.png) [@chulev](https://forum.formlabs.com/u/chulev)\ **Post date:** [October 31, 2016, 1:57am UTC](https://forum.formlabs.com/t/first-3d-print-on-form2/10245/1 "2016-10-31T01:57:44Z")
Hello all, I’m new to the formlabs community and it’s a pleasure to be part of it. It took me some time to choose which one I should go with, I did a lot of research but It always defaulted to formlabs. I finally made my choice so I wanted to share with you my first 3d print, it’s my first attempt and it was success. I am pretty happy with output. This is as it came out of form2, i used the clear resing and then I applied a grey neutral primer to it. I’ll take some better photos and more angle and will post soon. C&C are welcomed, we are all here to learn and push the bar. ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/5/516e06130b7df1e52c1af496ede601c93e7c3a1a.jpg) [my blog](http://www.markochulev.com/blog) Best Regards, Marko ---
**Author:** ![Zachary\_Brackin](https://avatars.discourse-cdn.com/v4/letter/z/4da419/32.png) [@Zachary\_Brackin](https://forum.formlabs.com/u/Zachary_Brackin)\ **Post date:** [October 31, 2016, 4:03pm UTC](https://forum.formlabs.com/t/first-3d-print-on-form2/10245/2 "2016-10-31T16:03:39Z")
Very nice, good job ---
**Author:** ![3dArtDigital](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/3dartdigital/32/8750_2.png) [@3dArtDigital](https://forum.formlabs.com/u/3dArtDigital)\ **Post date:** [October 31, 2016, 6:43pm UTC](https://forum.formlabs.com/t/first-3d-print-on-form2/10245/3 "2016-10-31T18:43:06Z")
Yes, it looks very cool Сhulev And what size is this model? And what resolution it was printed? ---
**Author:** ![ptetzlaf](https://avatars.discourse-cdn.com/v4/letter/p/96bed5/32.png) [@ptetzlaf](https://forum.formlabs.com/u/ptetzlaf)\ **Post date:** [November 1, 2016, 12:48am UTC](https://forum.formlabs.com/t/first-3d-print-on-form2/10245/4 "2016-11-01T00:48:56Z")
Welcome to the club 🙂 We use our Form2 strictly for engineering (Design Department Inc) but it is really cool to see it being used just as heavily for the arts too. ---
**Author:** ![chulev](https://avatars.discourse-cdn.com/v4/letter/c/9dc877/32.png) [@chulev](https://forum.formlabs.com/u/chulev)\ **Post date:** [November 7, 2016, 12:28am UTC](https://forum.formlabs.com/t/first-3d-print-on-form2/10245/5 "2016-11-07T00:28:08Z")
thanks Zachary ---
**Author:** ![chulev](https://avatars.discourse-cdn.com/v4/letter/c/9dc877/32.png) [@chulev](https://forum.formlabs.com/u/chulev)\ **Post date:** [November 7, 2016, 12:29am UTC](https://forum.formlabs.com/t/first-3d-print-on-form2/10245/6 "2016-11-07T00:29:16Z")
Thanks 3dArtDigital, its printed on 0.05mm and the size is 4 inches tall. Took about 8hours. ---
**Author:** ![chulev](https://avatars.discourse-cdn.com/v4/letter/c/9dc877/32.png) [@chulev](https://forum.formlabs.com/u/chulev)\ **Post date:** [November 7, 2016, 12:30am UTC](https://forum.formlabs.com/t/first-3d-print-on-form2/10245/7 "2016-11-07T00:30:54Z")
thanks Ptetzlaf. It’s great too see how we all use it in different areas. Endless possibilities tho. ---
**Author:** ![sytran](https://avatars.discourse-cdn.com/v4/letter/s/ed8c4c/32.png) [@sytran](https://forum.formlabs.com/u/sytran)\ **Post date:** [November 10, 2016, 7:23am UTC](https://forum.formlabs.com/t/first-3d-print-on-form2/10245/8 "2016-11-10T07:23:12Z")
damn thats cool chulev! ---
**Author:** ![pixeldesire3d](https://avatars.discourse-cdn.com/v4/letter/p/ed655f/32.png) [@pixeldesire3d](https://forum.formlabs.com/u/pixeldesire3d)\ **Post date:** [February 10, 2017, 9:04pm UTC](https://forum.formlabs.com/t/first-3d-print-on-form2/10245/9 "2017-02-10T21:04:33Z")
beautiful character Chulev! your Art Station page is wicked cool.