# Firmware 1.19.5 & Resin Sensor Error

**URL:** <https://forum.formlabs.com/t/firmware-1-19-5-resin-sensor-error/22857>\
**Category:** Support & Troubleshooting\
**Created:** [April 1, 2019, 2:38pm UTC](https://forum.formlabs.com/t/firmware-1-19-5-resin-sensor-error/22857 "2019-04-01T14:38:11Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![karambu](https://avatars.discourse-cdn.com/v4/letter/k/ac8455/32.png) [@karambu](https://forum.formlabs.com/u/karambu)\
**Post date:** [April 1, 2019, 2:38pm UTC](https://forum.formlabs.com/t/firmware-1-19-5-resin-sensor-error/22857/1 "2019-04-01T14:38:12Z")

</div>

Ever since I updated our 6 Form2 printers to firmware 1.19.5 they have been falling victim one by one to Resin Sensor Error and can no longer print. Is anyone else experiencing this?

---

<div class="post-metadata">

**Author:** ![karambu](https://avatars.discourse-cdn.com/v4/letter/k/ac8455/32.png) [@karambu](https://forum.formlabs.com/u/karambu)\
**Post date:** [April 1, 2019, 3:12pm UTC](https://forum.formlabs.com/t/firmware-1-19-5-resin-sensor-error/22857/2 "2019-04-01T15:12:28Z")

</div>

That wasn’t it… rolled back firmware on the 3 broken ones and still broken

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [April 15, 2019, 3:12pm UTC](https://forum.formlabs.com/t/firmware-1-19-5-resin-sensor-error/22857/3 "2019-04-15T15:12:32Z")

</div>

Closed on April 15, 2019, 3:12pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
