# File upload to Form3 at a stand still

**URL:** <https://forum.formlabs.com/t/file-upload-to-form3-at-a-stand-still/24380>\
**Category:** Form 3/3+\
**Created:** [August 15, 2019, 12:23am UTC](https://forum.formlabs.com/t/file-upload-to-form3-at-a-stand-still/24380 "2019-08-15T00:23:56Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![WesternDental](https://avatars.discourse-cdn.com/v4/letter/w/ed655f/32.png) [@WesternDental](https://forum.formlabs.com/u/WesternDental)\
**Post date:** [August 15, 2019, 12:23am UTC](https://forum.formlabs.com/t/file-upload-to-form3-at-a-stand-still/24380/1 "2019-08-15T00:23:57Z")

</div>

I’ve been trying to send a Preform file to my new Form3 and it is just sitting there. I have tryied WiFi, USB, and hard wired ethernet with no difference. It says its generating print files but the progress bar just sits at about 1/3 of the way across.

Print file is ~950 layers, 50 microns, and Dental Model resin.

I have been using the Form1 and Form2 from the beginning so I’m not new to these machines and preform software.

Any ideas?