# Failed Prints on Form 3+

**URL:** <https://forum.formlabs.com/t/failed-prints-on-form-3/34023>\
**Category:** Form 3/3+\
**Created:** [May 20, 2022, 9:02pm UTC](https://forum.formlabs.com/t/failed-prints-on-form-3/34023 "2022-05-20T21:02:58Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Breadwig](https://avatars.discourse-cdn.com/v4/letter/b/e495f1/32.png) [@Breadwig](https://forum.formlabs.com/u/Breadwig)\
**Post date:** [May 20, 2022, 9:02pm UTC](https://forum.formlabs.com/t/failed-prints-on-form-3/34023/1 "2022-05-20T21:02:58Z")

</div>

My last three prints have failed. I’ve been printing the same models with the same resin successfully for months and now all of a sudden this is happening. I’ve done the cleaning mesh after each fail and checked the leveling. Any ideas on what’s going on?

 ![Screenshot 2022-05-20 170056](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/f/c/fc1273da5414e4ac063707f6747bf9669a8340f8.jpeg)  
 ![20220520_162643](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/8/3/836e850ac2f1dc72df92084524673938a8b714f6.jpeg)  
 ![20220520_162705](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/1/2/12813710c4e23b5fec28cfb164a3aa22b57c6bed.jpeg)  
 ![20220520_162818](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/4/b/4b46a3f9a9d50fa0ef78904f4ad0f5c2576f22e1.jpeg)  
 ![20220520_163227](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/9/b/9b797abddcd67615056394db85a5a00a9dc76762.jpeg)

---

<div class="post-metadata">

**Author:** ![Corey\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/corey_m/32/18987_2.png) [@Corey\_M](https://forum.formlabs.com/u/Corey_M)\
**Post date:** [August 4, 2022, 5:18pm UTC](https://forum.formlabs.com/t/failed-prints-on-form-3/34023/2 "2022-08-04T17:18:36Z")

</div>

Hi @Breadwig,

Sorry for the late reply, but I have been combing through older posts to check for any we missed. I would definitely [reach out to our Support Team](https://support.formlabs.com/s/contact-support?language=en_US) with these photos and .form files if you are still having any related issues and we can get it sorted out!

---

<div class="post-metadata">

**Author:** ![Breadwig](https://avatars.discourse-cdn.com/v4/letter/b/e495f1/32.png) [@Breadwig](https://forum.formlabs.com/u/Breadwig)\
**Post date:** [August 4, 2022, 5:55pm UTC](https://forum.formlabs.com/t/failed-prints-on-form-3/34023/3 "2022-08-04T17:55:26Z")

</div>

Figured it out, needed a new tank.

thanks

---

<div class="post-metadata">

**Author:** ![Corey\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/corey_m/32/18987_2.png) [@Corey\_M](https://forum.formlabs.com/u/Corey_M)\
**Post date:** [August 4, 2022, 6:41pm UTC](https://forum.formlabs.com/t/failed-prints-on-form-3/34023/4 "2022-08-04T18:41:45Z")

</div>

Hey @Breadwig,

I’m glad to hear it! Take care!