# Experimenting with clear resin

**URL:** <https://forum.formlabs.com/t/experimenting-with-clear-resin/15393>\
**Category:** Experimental\
**Created:** [October 11, 2017, 6:34pm UTC](https://forum.formlabs.com/t/experimenting-with-clear-resin/15393 "2017-10-11T18:34:39Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![kevinduhe](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/kevinduhe/32/7999_2.png) [@kevinduhe](https://forum.formlabs.com/u/kevinduhe)\
**Post date:** [October 11, 2017, 8:21pm UTC](https://forum.formlabs.com/t/experimenting-with-clear-resin/15393/4 "2017-10-11T20:21:32Z")

</div>

> [@Resin Tank/Print capacity in mL?](https://forum.formlabs.com/t/resin-tank-print-capacity-in-ml/1658/2):
>
> The resin tank holds about 200mL at the Maximum Fill Line printed on the front of the tank.

Couple of things to note: This quote was from 2014. Probably for a Form 1/1+ Not sure if the capacity changed.

Also my Form2 always auto fills approximately 1-2 mm past the black fill line. I’ve never had a problem with overfill.

---

_[View the full topic](https://forum.formlabs.com/t/experimenting-with-clear-resin/15393)._