# Error41 form2

**URL:** <https://forum.formlabs.com/t/error41-form2/31504>\
**Category:** Form 2\
**Created:** [July 12, 2021, 6:38pm UTC](https://forum.formlabs.com/t/error41-form2/31504 "2021-07-12T18:38:23Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![khushi786](https://avatars.discourse-cdn.com/v4/letter/k/f19dbf/32.png) [@khushi786](https://forum.formlabs.com/u/khushi786)\
**Post date:** [July 12, 2021, 6:38pm UTC](https://forum.formlabs.com/t/error41-form2/31504/1 "2021-07-12T18:38:24Z")

</div>

I have a Form 2 printer, it was closed for CVD 19 for 1 month. But now I am going to print showing error 41. Let’s go to the platform itself. to up, support me plz some one

 ![31%20PM](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/0/0/004839d5864e37691d3087f17f0b8fd8ab3213ef.jpeg)

---

<div class="post-metadata">

**Author:** ![fantasy2](https://avatars.discourse-cdn.com/v4/letter/f/a88e4f/32.png) [@fantasy2](https://forum.formlabs.com/u/fantasy2)\
**Post date:** [July 12, 2021, 6:56pm UTC](https://forum.formlabs.com/t/error41-form2/31504/2 "2021-07-12T18:56:34Z")

</div>

This is a problem with the galvo mirror cables. You need to remove them and insert them a few times.

Best to contact support and ask for the PDF instructions to solve it.

---

<div class="post-metadata">

**Author:** ![khushi786](https://avatars.discourse-cdn.com/v4/letter/k/f19dbf/32.png) [@khushi786](https://forum.formlabs.com/u/khushi786)\
**Post date:** [July 16, 2021, 5:40pm UTC](https://forum.formlabs.com/t/error41-form2/31504/3 "2021-07-16T17:40:37Z")

</div>

thank u how to contact give me any link

---

<div class="post-metadata">

**Author:** ![Jackson](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/jackson/32/17924_2.png) [@Jackson](https://forum.formlabs.com/u/Jackson)\
**Post date:** [July 19, 2021, 2:30pm UTC](https://forum.formlabs.com/t/error41-form2/31504/4 "2021-07-19T14:30:05Z")

</div>

Hi @khushi786,

I’m so sorry that you ran into this issue! This error code is displayed when the printer detects an unusual power draw from the galvanometers. This is a safety measure that prevents damage to the printer if the galvanometers behave unexpectedly.

This behavior may be caused by a loose connection with the galvanometer cables inside the printer. For the best way to go about fixing this issue, be sure to [contact our support team](https://support.formlabs.com/s/contact-support?language=en_US). They’ll be able to provide you with a PDF of instructions for how to resolve this problem!

---

<div class="post-metadata">

**Author:** ![terentiy](https://avatars.discourse-cdn.com/v4/letter/t/df705f/32.png) [@terentiy](https://forum.formlabs.com/u/terentiy)\
**Post date:** [October 21, 2021, 7:33pm UTC](https://forum.formlabs.com/t/error41-form2/31504/5 "2021-10-21T19:33:15Z")

</div>

We swapped cables from the galvo mirrors (red and black ones) from our old form 2 and the error has been gone