# Error Code 68

**URL:** <https://forum.formlabs.com/t/error-code-68/36007>\
**Category:** Form 3L\
**Created:** [April 14, 2023, 5:45pm UTC](https://forum.formlabs.com/t/error-code-68/36007 "2023-04-14T17:45:15Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JASON1](https://avatars.discourse-cdn.com/v4/letter/j/b19c9b/32.png) [@JASON1](https://forum.formlabs.com/u/JASON1)\
**Post date:** [April 14, 2023, 5:45pm UTC](https://forum.formlabs.com/t/error-code-68/36007/1 "2023-04-14T17:45:15Z")

</div>

anybody seen Error Code 68 on the Form 3L? have had it a couple times.

---

<div class="post-metadata">

**Author:** ![Jesse\_K](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/jesse_k/32/18872_2.png) [@Jesse\_K](https://forum.formlabs.com/u/Jesse_K)\
**Post date:** [April 14, 2023, 10:31pm UTC](https://forum.formlabs.com/t/error-code-68/36007/2 "2023-04-14T22:31:35Z")

</div>

Hi @JASON1,

Thanks for getting in touch about this. This error is related to the printer’s communication to one or both of the LPUs. Since this is a more complex issue to troubleshoot, I would highly encourage you to [reach out to our Support Team](https://support.formlabs.com/s/contact-support?language=en_US) to narrow this down further.

---

<div class="post-metadata">

**Author:** ![JASON1](https://avatars.discourse-cdn.com/v4/letter/j/b19c9b/32.png) [@JASON1](https://forum.formlabs.com/u/JASON1)\
**Post date:** [April 14, 2023, 11:11pm UTC](https://forum.formlabs.com/t/error-code-68/36007/3 "2023-04-14T23:11:24Z")

</div>

I have thanks for getting back to me

Jason