# Draft thickness

**URL:** <https://forum.formlabs.com/t/draft-thickness/673>\
**Category:** Feature Requests & Ideas\
**Created:** [November 22, 2013, 11:29am UTC](https://forum.formlabs.com/t/draft-thickness/673 "2013-11-22T11:29:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gillesalexandre](https://avatars.discourse-cdn.com/v4/letter/g/73ab20/32.png) [@Gillesalexandre](https://forum.formlabs.com/u/Gillesalexandre)\
**Post date:** [November 22, 2013, 11:29am UTC](https://forum.formlabs.com/t/draft-thickness/673/1 "2013-11-22T11:29:21Z")

</div>

I think it could be cool to have a higher layer thickness option like 0.2 mm or 0.3 mm . That way we will be able to quickly print for prototype or just test prints and see if everything is ok without loosing to much time.

---

<div class="post-metadata">

**Author:** ![SamJ](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SamJ](https://forum.formlabs.com/u/SamJ)\
**Post date:** [November 22, 2013, 3:44pm UTC](https://forum.formlabs.com/t/draft-thickness/673/2 "2013-11-22T15:44:58Z")

</div>

There are some limitations to how deeply the laser cures into the resin, so it’s not necessarily so simple as adding another option – but we would certainly like to see the ability to print as quickly as possible.