# Different position at printer platform vs. software position

**URL:** https://forum.formlabs.com/t/different-position-at-printer-platform-vs-software-position/4672
**Category:** Support & Troubleshooting
**Created:** [May 28, 2015, 9:55am UTC](https://forum.formlabs.com/t/different-position-at-printer-platform-vs-software-position/4672 "2015-05-28T09:55:39Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Diana\_Maryschka](https://avatars.discourse-cdn.com/v4/letter/d/34f0e0/32.png) [@Diana\_Maryschka](https://forum.formlabs.com/u/Diana_Maryschka)
#### Post date: [May 28, 2015, 9:55am UTC](https://forum.formlabs.com/t/different-position-at-printer-platform-vs-software-position/4672/1 "2015-05-28T09:55:39Z")

</div>

Hi,  
My parts are at a different position like i put it at the software.  
I think i must do a calibration.  
But how?  
Could anyone help?

![](http://forum.formlabs.com/uploads/formlabs/3699/70fda20933d05d46.jpg)

![](http://forum.formlabs.com/uploads/formlabs/3698/1df4db838cc207a6.jpg)

---

<div class="post-metadata">

### Author: ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)
#### Post date: [June 11, 2015, 9:56am UTC](https://forum.formlabs.com/t/different-position-at-printer-platform-vs-software-position/4672/2 "2015-06-11T09:56:01Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.