# Different names for flexible resin in Preform 2.5.0 and Firmware 1.6

**URL:** <https://forum.formlabs.com/t/different-names-for-flexible-resin-in-preform-2-5-0-and-firmware-1-6/8681>\
**Category:** Form 2\
**Created:** [June 21, 2016, 12:29pm UTC](https://forum.formlabs.com/t/different-names-for-flexible-resin-in-preform-2-5-0-and-firmware-1-6/8681 "2016-06-21T12:29:47Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![invendo](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/invendo/32/6137_2.png) [@invendo](https://forum.formlabs.com/u/invendo)\
**Post date:** [June 21, 2016, 12:29pm UTC](https://forum.formlabs.com/t/different-names-for-flexible-resin-in-preform-2-5-0-and-firmware-1-6/8681/1 "2016-06-21T12:29:47Z")

</div>

I would print something with flexible resin FLFLGR02.

I set the Resin in Preform (2.5.0) and start the upload to the Printer.  
The printer (Firmware 1.6) detects a Resin “Flexible V2” and stop the job, but the cartridge is correct labeld to “FLFLGR02”

Look like a bug between preform and firmware.

Please fix it ASAP.

---

<div class="post-metadata">

**Author:** ![Cody](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/cody/32/6179_2.png) [@Cody](https://forum.formlabs.com/u/Cody)\
**Post date:** [June 21, 2016, 9:25pm UTC](https://forum.formlabs.com/t/different-names-for-flexible-resin-in-preform-2-5-0-and-firmware-1-6/8681/3 "2016-06-21T21:25:32Z")

</div>

I’m able to go through the process of printing with FlexV2 on PreForm 2.5.0 and firmware 1.6.0 without any problem. Everything correctly displays as Flexible V2 on the printer UI.

What’s the specific error that the printer reports, and what materials does it report for each of tank, cartridge, and print?

> [@invendo](#):
>
> The printer (Firmware 1.6) detects a Resin “Flexible V2” and stop the job, but the cartridge is correct labeld to “FLFLGR02”

Did you mean to say that the printer detects the cartridge as “Flexible V1”, but the paper label on the cartridge is for “Flexible V2”? If that’s the case then you should open a [support ticket](http://formlabs.com/support/submitting-a-ticket/) and we’ll work one on one with you to get this resolved.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [July 5, 2016, 9:37pm UTC](https://forum.formlabs.com/t/different-names-for-flexible-resin-in-preform-2-5-0-and-firmware-1-6/8681/4 "2016-07-05T21:37:42Z")

</div>

Closed on July 5, 2016, 9:37pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.