# Dental SG failure when prints over a certain size

**URL:** <https://forum.formlabs.com/t/dental-sg-failure-when-prints-over-a-certain-size/20116>\
**Category:** General Discussion\
**Created:** [August 19, 2018, 8:03am UTC](https://forum.formlabs.com/t/dental-sg-failure-when-prints-over-a-certain-size/20116 "2018-08-19T08:03:19Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![howler36](https://avatars.discourse-cdn.com/v4/letter/h/47e85d/32.png) [@howler36](https://forum.formlabs.com/u/howler36)\
**Post date:** [August 19, 2018, 8:03am UTC](https://forum.formlabs.com/t/dental-sg-failure-when-prints-over-a-certain-size/20116/1 "2018-08-19T08:03:19Z")

</div>

Has anyone else tried the Dental SG resin and had issue with the prints always sticking to the window when the print size reaches a certain size?

---

<div class="post-metadata">

**Author:** ![mitzekotze](https://avatars.discourse-cdn.com/v4/letter/m/aeb1de/32.png) [@mitzekotze](https://forum.formlabs.com/u/mitzekotze)\
**Post date:** [August 20, 2018, 4:28pm UTC](https://forum.formlabs.com/t/dental-sg-failure-when-prints-over-a-certain-size/20116/2 "2018-08-20T16:28:34Z")

</div>

Same problem here.

---

<div class="post-metadata">

**Author:** ![labim](https://avatars.discourse-cdn.com/v4/letter/l/50afbb/32.png) [@labim](https://forum.formlabs.com/u/labim)\
**Post date:** [November 14, 2018, 9:59am UTC](https://forum.formlabs.com/t/dental-sg-failure-when-prints-over-a-certain-size/20116/3 "2018-11-14T09:59:20Z")

</div>

We have the same problem, and looks common (http://forum.formlabs.com/t/multiple-failed-prints-with-sg-resin/20649)

Any solution?