# Dental Model V1 + Dental Model V2?

**URL:** <https://forum.formlabs.com/t/dental-model-v1-dental-model-v2/18688>\
**Category:** Support & Troubleshooting\
**Created:** [May 8, 2018, 4:35pm UTC](https://forum.formlabs.com/t/dental-model-v1-dental-model-v2/18688 "2018-05-08T16:35:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![G17](https://avatars.discourse-cdn.com/v4/letter/g/f08c70/32.png) [@G17](https://forum.formlabs.com/u/G17)\
**Post date:** [May 8, 2018, 4:35pm UTC](https://forum.formlabs.com/t/dental-model-v1-dental-model-v2/18688/1 "2018-05-08T16:35:13Z")

</div>

I have a half full cartridge of Dental Model Resin V1 and a half full cartridge of Dental Model V2. I was wondering if its okay to pour the remaining resin of the V1 into the V2 cartridge with the rest of the V2 as to not have to change tanks. Would that change the properties of the resin and cause problems?

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [May 22, 2018, 4:35pm UTC](https://forum.formlabs.com/t/dental-model-v1-dental-model-v2/18688/2 "2018-05-22T16:35:21Z")

</div>

Closed on May 22, 2018, 4:35pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.