# Custom support structure and also touching build platform

**URL:** <https://forum.formlabs.com/t/custom-support-structure-and-also-touching-build-platform/16386>\
**Category:** Projects & Prints\
**Created:** [December 18, 2017, 3:30pm UTC](https://forum.formlabs.com/t/custom-support-structure-and-also-touching-build-platform/16386 "2017-12-18T15:30:03Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![marK](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@marK](https://forum.formlabs.com/u/marK)\
**Post date:** [December 18, 2017, 3:30pm UTC](https://forum.formlabs.com/t/custom-support-structure-and-also-touching-build-platform/16386/1 "2017-12-18T15:30:03Z")

</div>

Hi Community, my problem is with the program PreForm.

I would like to print a component with its flat surface directly to the build platform without a support structure in between. But this is not the problem. The point is that I also need additional support structure for overhanging parts of the component, and when I create it, it automatically raises the component away from the build platform. How can I prevent this when adding support structure?

Thank you four your help 🙂  
Mark

---

<div class="post-metadata">

**Author:** ![JohnHue](https://avatars.discourse-cdn.com/v4/letter/j/48db29/32.png) [@JohnHue](https://forum.formlabs.com/u/JohnHue)\
**Post date:** [December 18, 2017, 4:26pm UTC](https://forum.formlabs.com/t/custom-support-structure-and-also-touching-build-platform/16386/2 "2017-12-18T16:26:31Z")

</div>

AFAIK this is not supported by Preform, although that would definitely be a good feature to request in the appropriate category.

What I have done in the past to solve this kind of issues is modeling some sort of support structure in my CAD software, and only then exporting to preform.

---

<div class="post-metadata">

**Author:** ![coffeejelli](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/coffeejelli/32/11295_2.png) [@coffeejelli](https://forum.formlabs.com/u/coffeejelli)\
**Post date:** [December 18, 2017, 4:27pm UTC](https://forum.formlabs.com/t/custom-support-structure-and-also-touching-build-platform/16386/3 "2017-12-18T16:27:12Z")

</div>

Hi! I don’t think it’s possible to do this in Preform so I would assume you would have to use another CAD program to add supports manually. In my experience whether I use Preform or another CAD program it automatically makes a base for the supports so the object would be above the built plate but my experience in CAD programs are very limited. Good luck!

EDIT: I’m going to echo what @JohnHue said! 😄

---

<div class="post-metadata">

**Author:** ![Frew](https://avatars.discourse-cdn.com/v4/letter/f/c0e974/32.png) [@Frew](https://forum.formlabs.com/u/Frew)\
**Post date:** [December 18, 2017, 5:16pm UTC](https://forum.formlabs.com/t/custom-support-structure-and-also-touching-build-platform/16386/4 "2017-12-18T17:16:24Z")

</div>

Internal supports can be printed without a base but supports that contact the platform require a full base currently. We’ll look into to make miniature bases that accommodate a few supports from the build platform instead of the entire raft. Custom supports are probably the way to go until then 🙂
