# Cure L Sleep mode

**URL:** <https://forum.formlabs.com/t/cure-l-sleep-mode/36454>\
**Category:** Support & Troubleshooting\
**Created:** [June 27, 2023, 8:22am UTC](https://forum.formlabs.com/t/cure-l-sleep-mode/36454 "2023-06-27T08:22:08Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![printscan](https://avatars.discourse-cdn.com/v4/letter/p/a698b9/32.png) [@printscan](https://forum.formlabs.com/u/printscan)\
**Post date:** [June 27, 2023, 8:22am UTC](https://forum.formlabs.com/t/cure-l-sleep-mode/36454/1 "2023-06-27T08:22:08Z")

</div>

Hi,

I have the Cure L. The Cure stays always on.  
Is it possible to turn it to sleep mode?

thanks

---

<div class="post-metadata">

**Author:** ![Jared](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/jared/32/19570_2.png) [@Jared](https://forum.formlabs.com/u/Jared)\
**Post date:** [June 27, 2023, 6:40pm UTC](https://forum.formlabs.com/t/cure-l-sleep-mode/36454/2 "2023-06-27T18:40:52Z")

</div>

Hi @printscan,

The Cure L does not have a Sleep Mode. I’m happy to submit this feature request to our Product Team on your behalf! I cannot guarantee a timeline for this feature or if it will be implemented, but our Product Team will review the feedback when considering future updates to PreFrom!

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [December 27, 2023, 6:41am UTC](https://forum.formlabs.com/t/cure-l-sleep-mode/36454/3 "2023-12-27T06:41:06Z")

</div>

This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.