# Cootie Catcher!

**URL:** <https://forum.formlabs.com/t/cootie-catcher/6362>\
**Category:** Projects & Prints\
**Created:** [September 18, 2015, 5:42pm UTC](https://forum.formlabs.com/t/cootie-catcher/6362 "2015-09-18T17:42:39Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Anthony\_Huczek](https://avatars.discourse-cdn.com/v4/letter/a/ce7236/32.png) [@Anthony\_Huczek](https://forum.formlabs.com/u/Anthony_Huczek)\
**Post date:** [September 18, 2015, 5:42pm UTC](https://forum.formlabs.com/t/cootie-catcher/6362/1 "2015-09-18T17:42:39Z")

</div>

Just printed this yesterday as a test print for something at work and now I have the crazy idea to create a full works like prototype using living hinges. I’m not sure if I’ll have the time but it would be a fun project. I had to google how to make them out of paper to figure out the angles in solidworks. It had been so long! haha. Anyway, enjoy the shots!

 ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/f/f9e57bec81282bae79e6fe17f00cadabf6becf29.JPG) 

 ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/a/a7eb7d034e0022bb8d712d2a5886ccfb8db4439c.JPG)

---

<div class="post-metadata">

**Author:** ![JenniferMilne](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@JenniferMilne](https://forum.formlabs.com/u/JenniferMilne)\
**Post date:** [September 23, 2015, 9:02pm UTC](https://forum.formlabs.com/t/cootie-catcher/6362/2 "2015-09-23T21:02:23Z")

</div>

If you get round to trying it with living hinges that might be a good project for our Tough Resin.

---

<div class="post-metadata">

**Author:** ![Jory](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/jory/32/229_2.png) [@Jory](https://forum.formlabs.com/u/Jory)\
**Post date:** [September 24, 2015, 8:18pm UTC](https://forum.formlabs.com/t/cootie-catcher/6362/3 "2015-09-24T20:18:42Z")

</div>

Or use castable and make a metal one!