# Coloring Clear Resin

**URL:** <https://forum.formlabs.com/t/coloring-clear-resin/18590>\
**Category:** General Discussion\
**Created:** [May 2, 2018, 4:33am UTC](https://forum.formlabs.com/t/coloring-clear-resin/18590 "2018-05-02T04:33:44Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![vincentsiu8899](https://avatars.discourse-cdn.com/v4/letter/v/57b2e6/32.png) [@vincentsiu8899](https://forum.formlabs.com/u/vincentsiu8899)\
**Post date:** [May 2, 2018, 4:33am UTC](https://forum.formlabs.com/t/coloring-clear-resin/18590/1 "2018-05-02T04:33:44Z")

</div>

Does anyone know how I would go about coloring clear resin so that it is tinted with the color, but still slightly transparent?

---

<div class="post-metadata">

**Author:** ![JohnHue](https://avatars.discourse-cdn.com/v4/letter/j/48db29/32.png) [@JohnHue](https://forum.formlabs.com/u/JohnHue)\
**Post date:** [May 2, 2018, 7:21am UTC](https://forum.formlabs.com/t/coloring-clear-resin/18590/2 "2018-05-02T07:21:42Z")

</div>

Acrylic dyes are the way to go. Searching for “dye” on the forum will yield several results.

---

<div class="post-metadata">

**Author:** ![vincentsiu8899](https://avatars.discourse-cdn.com/v4/letter/v/57b2e6/32.png) [@vincentsiu8899](https://forum.formlabs.com/u/vincentsiu8899)\
**Post date:** [May 2, 2018, 7:45am UTC](https://forum.formlabs.com/t/coloring-clear-resin/18590/3 "2018-05-02T07:45:11Z")

</div>

@JohnHue does the dye work if you apply after the part has been printed or do you have to dye the resin in the tank? Id rather not dye the tank resin and ruin a whole tank of resin for one piece?

---

<div class="post-metadata">

**Author:** ![JohnHue](https://avatars.discourse-cdn.com/v4/letter/j/48db29/32.png) [@JohnHue](https://forum.formlabs.com/u/JohnHue)\
**Post date:** [May 2, 2018, 7:49am UTC](https://forum.formlabs.com/t/coloring-clear-resin/18590/4 "2018-05-02T07:49:25Z")

</div>

It works after the part has been printed, I have had better results dying before the post-curing operation. Both methods have been discussed here in the last few months.

---

<div class="post-metadata">

**Author:** ![Annabel](https://avatars.discourse-cdn.com/v4/letter/a/ee59a6/32.png) [@Annabel](https://forum.formlabs.com/u/Annabel)\
**Post date:** [May 2, 2018, 11:30am UTC](https://forum.formlabs.com/t/coloring-clear-resin/18590/5 "2018-05-02T11:30:15Z")

</div>

Do you have a link to those threads? Because when I search for the topics I mostly get threads about dyeing the tank/resin before printing.

I did find one that is promising, but it never showed any further tests or results

> [@Tinting clear parts with Solvent Dye](http://forum.formlabs.com/t/tinting-clear-parts-with-solvent-dye/8389):
>
> Last year I learned to tint 3D printed parts made on my SD300 in PVC (thermoplastic vinyl) using Sculpt Nouveau solvent dyes with a thermoplastic-fusing solvent. I’ve been trying to adapt it to parts made on the Form 2. The colors aren’t quite as intense because SLA uses thermoset resins, which can’t be solvent fused. (Thermoset plastics can’t be re-melted.) But my initial results are worth sharing because the colors are acceptable and the method is simple! Background (skip this if you don’…

---

<div class="post-metadata">

**Author:** ![JohnHue](https://avatars.discourse-cdn.com/v4/letter/j/48db29/32.png) [@JohnHue](https://forum.formlabs.com/u/JohnHue)\
**Post date:** [May 2, 2018, 11:43am UTC](https://forum.formlabs.com/t/coloring-clear-resin/18590/6 "2018-05-02T11:43:05Z")

</div>

This is mostly the one I was thinking about. I think the results with Clear were pretty good and similar to what I have gotten (using DyeMore from Rit Dye), isn’t that what you are looking for ?

This method tends to dye the first few 0.1mm on the surface of the parts so any post treatment that would remove material will alter the result, this is probably why people have been dying the uncured resin.

---

<div class="post-metadata">

**Author:** ![Annabel](https://avatars.discourse-cdn.com/v4/letter/a/ee59a6/32.png) [@Annabel](https://forum.formlabs.com/u/Annabel)\
**Post date:** [May 4, 2018, 12:06pm UTC](https://forum.formlabs.com/t/coloring-clear-resin/18590/7 "2018-05-04T12:06:46Z")

</div>

I was hoping to see more tests or results. Aside from the clear resin results, they posted some of the white too, would have been nice if there was something that worked for that too. But thanks, then I know I was in the right spot at least.
