# Clear Resin

**URL:** <https://forum.formlabs.com/t/clear-resin/28625>\
**Category:** General Discussion\
**Created:** [August 26, 2020, 8:47pm UTC](https://forum.formlabs.com/t/clear-resin/28625 "2020-08-26T20:47:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mprzytarski](https://avatars.discourse-cdn.com/v4/letter/m/ce7236/32.png) [@Mprzytarski](https://forum.formlabs.com/u/Mprzytarski)\
**Post date:** [August 26, 2020, 8:47pm UTC](https://forum.formlabs.com/t/clear-resin/28625/1 "2020-08-26T20:47:01Z")

</div>

Using a FORM 3, and will be using Clear Resin. The prototype is using Gray and seems to be a tad rough on one side (Not the supports though that’s another thing I need to remove) and it almost like a scaling. What is the best way to remove it (Is there a software command I missed?) without scratching the clear surface. These are replacement buttons for machines and they cover a LCD display so it needs to be clear.

Thanks in advance.

---

<div class="post-metadata">

**Author:** ![DKirch](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/dkirch/32/20300_2.png) [@DKirch](https://forum.formlabs.com/u/DKirch)\
**Post date:** [August 27, 2020, 3:21pm UTC](https://forum.formlabs.com/t/clear-resin/28625/2 "2020-08-27T15:21:06Z")

</div>

Hey there!

Do you happen to have a photo of the issue? It would also be great to see how the part was oriented during printing.