# Clear Resin and White Resin In Isopropyl Alcohol

**URL:** <https://forum.formlabs.com/t/clear-resin-and-white-resin-in-isopropyl-alcohol/23470>\
**Category:** Form 2\
**Created:** [May 22, 2019, 2:14pm UTC](https://forum.formlabs.com/t/clear-resin-and-white-resin-in-isopropyl-alcohol/23470 "2019-05-22T14:14:38Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![cmahan](https://avatars.discourse-cdn.com/v4/letter/c/c5a1d2/32.png) [@cmahan](https://forum.formlabs.com/u/cmahan)\
**Post date:** [May 22, 2019, 2:14pm UTC](https://forum.formlabs.com/t/clear-resin-and-white-resin-in-isopropyl-alcohol/23470/1 "2019-05-22T14:14:38Z")

</div>

Hi Everyone,

I will be starting a V4 clear resin print but wanted to make sure that the clarity of the print will not be interfered with if I wash the clear part in ISP Alcohol that has already washed white resin parts. Should I clear out the Formwash everytime I use a different resin? Will any white resin get on the clear part and then cure when I put it in the UV cure? Thanks in advance.

---

<div class="post-metadata">

**Author:** ![fantasy2](https://avatars.discourse-cdn.com/v4/letter/f/a88e4f/32.png) [@fantasy2](https://forum.formlabs.com/u/fantasy2)\
**Post date:** [May 22, 2019, 2:25pm UTC](https://forum.formlabs.com/t/clear-resin-and-white-resin-in-isopropyl-alcohol/23470/2 "2019-05-22T14:25:00Z")

</div>

It’s no problem to wash all the resins in the same bucket except for Rigid resin. This does leave particles on other prints.

---

<div class="post-metadata">

**Author:** ![Zachary\_Brackin](https://avatars.discourse-cdn.com/v4/letter/z/4da419/32.png) [@Zachary\_Brackin](https://forum.formlabs.com/u/Zachary_Brackin)\
**Post date:** [May 22, 2019, 5:00pm UTC](https://forum.formlabs.com/t/clear-resin-and-white-resin-in-isopropyl-alcohol/23470/3 "2019-05-22T17:00:12Z")

</div>

You should do a final rinse in cleaner IPA after the soaking.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [May 29, 2019, 5:07pm UTC](https://forum.formlabs.com/t/clear-resin-and-white-resin-in-isopropyl-alcohol/23470/4 "2019-05-29T17:07:17Z")

</div>

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.