# Casting jewellery

**URL:** <https://forum.formlabs.com/t/casting-jewellery/8252>\
**Category:** Projects & Prints\
**Created:** [May 20, 2016, 6:27am UTC](https://forum.formlabs.com/t/casting-jewellery/8252 "2016-05-20T06:27:21Z")\
**Posts on this page:** 1\
**Showing post:** 321

<div class="post-metadata">

**Author:** ![katkramer](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/katkramer/32/15796_2.png) [@katkramer](https://forum.formlabs.com/u/katkramer)\
**Post date:** [February 4, 2018, 8:03pm UTC](https://forum.formlabs.com/t/casting-jewellery/8252/321 "2018-02-04T20:03:37Z")

</div>

Ah…I had to look up TruSilver. I’m using something similar from Rio…anti-oxidation casting grain. I’ve actually had problems trying to get it to take a nice patina. Thanks for the info on the temperatures…I’m casting at around 1865°F (1018°C), which is at the top end of what they recommend…I was having a problem with it not being fluid enough. Using a KayaCast vacuum system. Sounds like you have a really nice setup!

---

_[View the full topic](https://forum.formlabs.com/t/casting-jewellery/8252)._
