# Casting jewellery

**URL:** <https://forum.formlabs.com/t/casting-jewellery/8252>\
**Category:** Projects & Prints\
**Created:** [May 20, 2016, 6:27am UTC](https://forum.formlabs.com/t/casting-jewellery/8252 "2016-05-20T06:27:21Z")\
**Posts on this page:** 1\
**Showing post:** 205

<div class="post-metadata">

**Author:** ![BlueCat](https://avatars.discourse-cdn.com/v4/letter/b/ccd318/32.png) [@BlueCat](https://forum.formlabs.com/u/BlueCat)\
**Post date:** [November 26, 2016, 7:32pm UTC](https://forum.formlabs.com/t/casting-jewellery/8252/205 "2016-11-26T19:32:24Z")

</div>

Hi guys,

if you are interested in fast and accurate casting, you can consider our BlueCast resin.

No postcuring need, no exotic washes, no extra sprues, burnout cycle 1h.

Other words you cast metal after 2 hours you finish print.

You can read and see more here [Test of Blue-Cast: compatible and castable resin](http://forum.formlabs.com/t/test-of-blue-cast-compatible-and-castable-resin/10257/16)

---

_[View the full topic](https://forum.formlabs.com/t/casting-jewellery/8252)._