# Can't upload job from Preform to Form 2

**URL:** <https://forum.formlabs.com/t/cant-upload-job-from-preform-to-form-2/31875>\
**Category:** Form 2\
**Created:** [September 3, 2021, 6:50pm UTC](https://forum.formlabs.com/t/cant-upload-job-from-preform-to-form-2/31875 "2021-09-03T18:50:55Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Randomusername](https://avatars.discourse-cdn.com/v4/letter/r/ea666f/32.png) [@Randomusername](https://forum.formlabs.com/u/Randomusername)\
**Post date:** [September 3, 2021, 6:50pm UTC](https://forum.formlabs.com/t/cant-upload-job-from-preform-to-form-2/31875/1 "2021-09-03T18:50:56Z")

</div>

Cannot upload job to printer. Preform 3.18.0, Form 2 printer. Yes on same network. Yes rebooted computer. Yes restarted Preform. Happy friday

---

<div class="post-metadata">

**Author:** ![billb](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/billb/32/5587_2.png) [@billb](https://forum.formlabs.com/u/billb)\
**Post date:** [September 4, 2021, 8:04am UTC](https://forum.formlabs.com/t/cant-upload-job-from-preform-to-form-2/31875/2 "2021-09-04T08:04:23Z")

</div>

Did you check that the WiFi is connected?

---

<div class="post-metadata">

**Author:** ![Randomusername](https://avatars.discourse-cdn.com/v4/letter/r/ea666f/32.png) [@Randomusername](https://forum.formlabs.com/u/Randomusername)\
**Post date:** [September 7, 2021, 3:02am UTC](https://forum.formlabs.com/t/cant-upload-job-from-preform-to-form-2/31875/3 "2021-09-07T03:02:05Z")

</div>

Sure did 🙂

---

<div class="post-metadata">

**Author:** ![DKirch](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/dkirch/32/20300_2.png) [@DKirch](https://forum.formlabs.com/u/DKirch)\
**Post date:** [September 8, 2021, 6:19pm UTC](https://forum.formlabs.com/t/cant-upload-job-from-preform-to-form-2/31875/4 "2021-09-08T18:19:23Z")

</div>

Have you tried to connect via USB just to see if that’s possible? I realize it’s not quite as convenient as the Wi-Fi most of the time.

---

<div class="post-metadata">

**Author:** ![Randomusername](https://avatars.discourse-cdn.com/v4/letter/r/ea666f/32.png) [@Randomusername](https://forum.formlabs.com/u/Randomusername)\
**Post date:** [September 8, 2021, 8:37pm UTC](https://forum.formlabs.com/t/cant-upload-job-from-preform-to-form-2/31875/5 "2021-09-08T20:37:53Z")

</div>

Updating firmware and rebooting both computer and printer several times seems to have fixed it. 🤷‍♂️
