# Can you print this part?

**URL:** <https://forum.formlabs.com/t/can-you-print-this-part/2176>\
**Category:** Support & Troubleshooting\
**Created:** [October 5, 2014, 1:45am UTC](https://forum.formlabs.com/t/can-you-print-this-part/2176 "2014-10-05T01:45:16Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![JoshK](https://avatars.discourse-cdn.com/v4/letter/j/4da419/32.png) [@JoshK](https://forum.formlabs.com/u/JoshK)\
**Post date:** [October 6, 2014, 3:01pm UTC](https://forum.formlabs.com/t/can-you-print-this-part/2176/5 "2014-10-06T15:01:59Z")

</div>

I tweaked his orientation too, but this is the model that prompted this new topic/feature request:

> [@First support placement](http://forum.formlabs.com/t/first-support-placement/2181):
>
> Can the auto support generator be made to always place a support at the lowest point of the model please? It seems to have a weird phobia against doing it on it’s own.

---

_[View the full topic](https://forum.formlabs.com/t/can-you-print-this-part/2176)._