# Can I turn off the beeps whilst printing?

**URL:** <https://forum.formlabs.com/t/can-i-turn-off-the-beeps-whilst-printing/4286>\
**Category:** Support & Troubleshooting\
**Created:** [April 21, 2015, 9:49pm UTC](https://forum.formlabs.com/t/can-i-turn-off-the-beeps-whilst-printing/4286 "2015-04-21T21:49:10Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Richard\_Boardman](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/richard_boardman/32/3444_2.png) [@Richard\_Boardman](https://forum.formlabs.com/u/Richard_Boardman)\
**Post date:** [April 21, 2015, 9:49pm UTC](https://forum.formlabs.com/t/can-i-turn-off-the-beeps-whilst-printing/4286/1 "2015-04-21T21:49:10Z")

</div>

The beep at the end of each printing cycle is driving my office neighbours nuts.

Is it normal?

Can I turn it off?

Thanks!

Rick

---

<div class="post-metadata">

**Author:** ![Alex\_Vermeer](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/alex_vermeer/32/2491_2.png) [@Alex\_Vermeer](https://forum.formlabs.com/u/Alex_Vermeer)\
**Post date:** [April 22, 2015, 5:53am UTC](https://forum.formlabs.com/t/can-i-turn-off-the-beeps-whilst-printing/4286/2 "2015-04-22T05:53:05Z")

</div>

Do you mean the sound of the peel motor going up? If so, no… If you mean an actual beep then make a video of the sound please.

---

<div class="post-metadata">

**Author:** ![Richard\_Boardman](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/richard_boardman/32/3444_2.png) [@Richard\_Boardman](https://forum.formlabs.com/u/Richard_Boardman)\
**Post date:** [April 22, 2015, 6:26pm UTC](https://forum.formlabs.com/t/can-i-turn-off-the-beeps-whilst-printing/4286/3 "2015-04-22T18:26:54Z")

</div>

This video highlights the beeping, it seems to be each time the platform shifts vertically:

“beep” at ~9secs and 19 secs

---

<div class="post-metadata">

**Author:** ![Paul\_Schommer](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/paul_schommer/32/2592_2.png) [@Paul\_Schommer](https://forum.formlabs.com/u/Paul_Schommer)\
**Post date:** [April 22, 2015, 6:33pm UTC](https://forum.formlabs.com/t/can-i-turn-off-the-beeps-whilst-printing/4286/4 "2015-04-22T18:33:50Z")

</div>

That is the sound of the stepper motor. Nothing to be done about it.

---

<div class="post-metadata">

**Author:** ![Alex\_Vermeer](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/alex_vermeer/32/2491_2.png) [@Alex\_Vermeer](https://forum.formlabs.com/u/Alex_Vermeer)\
**Post date:** [April 22, 2015, 7:44pm UTC](https://forum.formlabs.com/t/can-i-turn-off-the-beeps-whilst-printing/4286/5 "2015-04-22T19:44:25Z")

</div>

It does sound like the stepper/peel motor, however, it does have a much higher pitch than my printer. Perhaps try lubing it with PTFE grease

---

<div class="post-metadata">

**Author:** ![Anthony\_Huczek](https://avatars.discourse-cdn.com/v4/letter/a/ce7236/32.png) [@Anthony\_Huczek](https://forum.formlabs.com/u/Anthony_Huczek)\
**Post date:** [April 23, 2015, 3:27pm UTC](https://forum.formlabs.com/t/can-i-turn-off-the-beeps-whilst-printing/4286/6 "2015-04-23T15:27:07Z")

</div>

Totally normal. If you go to Formlabs site it even has an audio file exactly like the one you recorded showing the sounds of your printer.

My neighbors tell me it reminds them of being in a hospital. Like an oxygen machine or something haha.

---

<div class="post-metadata">

**Author:** ![Richard\_Boardman](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/richard_boardman/32/3444_2.png) [@Richard\_Boardman](https://forum.formlabs.com/u/Richard_Boardman)\
**Post date:** [April 23, 2015, 9:28pm UTC](https://forum.formlabs.com/t/can-i-turn-off-the-beeps-whilst-printing/4286/7 "2015-04-23T21:28:52Z")

</div>

> [@Anthony\_Huczek](#):
>
> Like an oxygen machine or somet

Thats exactly it! The machine than goes ping (Monty Python).

Its the “[0:17] MOTOR HUM - BUILD PLATFORM RESET:” - more of a beep than a hum if you ask me …

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [May 7, 2015, 9:29pm UTC](https://forum.formlabs.com/t/can-i-turn-off-the-beeps-whilst-printing/4286/8 "2015-05-07T21:29:37Z")

</div>

Closed on May 7, 2015, 9:29pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
