# Build Platform Never Moved

**URL:** <https://forum.formlabs.com/t/build-platform-never-moved/23040>\
**Category:** Form 2\
**Created:** [April 12, 2019, 3:17pm UTC](https://forum.formlabs.com/t/build-platform-never-moved/23040 "2019-04-12T15:17:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dineson](https://avatars.discourse-cdn.com/v4/letter/d/439d5e/32.png) [@dineson](https://forum.formlabs.com/u/dineson)\
**Post date:** [April 12, 2019, 3:17pm UTC](https://forum.formlabs.com/t/build-platform-never-moved/23040/1 "2019-04-12T15:17:29Z")

</div>

Just un-boxed and setup the printer.  
Uploaded a print file and printing started, except the build platform never moved.  
Currently at layer 6 of 895 layers, with the platform about 3 inched above the resin.  
Appreciate any assistance, to fix the problem and a procedure to properly clean up the tank / partial build without damaging anything…

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [April 19, 2019, 3:17pm UTC](https://forum.formlabs.com/t/build-platform-never-moved/23040/2 "2019-04-19T15:17:30Z")

</div>

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.