# Bug regarding new Printability feature

**URL:** <https://forum.formlabs.com/t/bug-regarding-new-printability-feature/12489>\
**Category:** Support & Troubleshooting\
**Created:** [March 23, 2017, 9:32pm UTC](https://forum.formlabs.com/t/bug-regarding-new-printability-feature/12489 "2017-03-23T21:32:45Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kevinduhe](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/kevinduhe/32/7999_2.png) [@kevinduhe](https://forum.formlabs.com/u/kevinduhe)\
**Post date:** [March 23, 2017, 9:32pm UTC](https://forum.formlabs.com/t/bug-regarding-new-printability-feature/12489/1 "2017-03-23T21:32:46Z")

</div>

Step 1: load file(s) into preform  
Step 2: Generate supports (verify printability is good ✅)  
Step 3: Save as .form file  
Step 4: Close and reopen Preform  
Step 5: load up the same .form file as step 3  
Step 6: Printability is now no bueno ❎, even tho supports have not changed and you cannot print.

EDIT: clearing the supports and regenerating will fix this of course…but if I had taken the time to edit the supports (which I normally do) it would be a bummer.

Screenshots from Steps 2 and steps 6 below

 ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/1/104eb02449b47d04765ff74033becbf5fee4e358.png)

 ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/0/0473788a07c872d8f04d2db41b2e7ff0b815caf4.png)

---

<div class="post-metadata">

**Author:** ![CraigBroady](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/craigbroady/32/6106_2.png) [@CraigBroady](https://forum.formlabs.com/u/CraigBroady)\
**Post date:** [March 23, 2017, 10:54pm UTC](https://forum.formlabs.com/t/bug-regarding-new-printability-feature/12489/2 "2017-03-23T22:54:59Z")

</div>

Nice catch.

@mgarrity

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [April 6, 2017, 10:54pm UTC](https://forum.formlabs.com/t/bug-regarding-new-printability-feature/12489/3 "2017-04-06T22:54:59Z")

</div>

Closed on April 6, 2017, 10:54pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
