# Budget UV Cure Box (Jar?)

**URL:** <https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176>\
**Category:** Projects & Prints\
**Created:** [January 5, 2015, 10:37pm UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176 "2015-01-05T22:37:43Z")\
**Posts on this page:** 20\
**Page:** 4

<div class="post-metadata">

**Author:** ![Randy\_Cohen](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/randy_cohen/32/1500_2.png) [@Randy\_Cohen](https://forum.formlabs.com/u/Randy_Cohen)\
**Post date:** [April 27, 2016, 5:52pm UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/62 "2016-04-27T17:52:08Z")

</div>

Yes. If you look at my first post, this is exactly what I did. Wrapped LEDs pointing inward around exterior of plastic jar, then wrapped aluminum foil around the outside of the LEDs, then wrapped the whole thing in Duct Tape to protect it. And yes, when I printed with FL Flexible resin, post cure requires submersion in water, I just filled the jar with tap water. Worked great…

For the Form1 printer, the cleaning containers fit inside the jar perfectly. I did some experimenting with just post-curing with the part in the IPA bath, which actually seemed to work pretty well. Mostly, though, I just toss parts in to the jar, dry, and let them sit overnight and they come out just fine…

---

<div class="post-metadata">

**Author:** ![mlabird](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/mlabird/32/6251_2.png) [@mlabird](https://forum.formlabs.com/u/mlabird)\
**Post date:** [May 14, 2016, 8:25pm UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/63 "2016-05-14T20:25:58Z")

</div>

Randy,

Thanks for doing the work to create this, I have just finished building one and your instructions were great.

Mike

 ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/f/f18c8d3ca1917fc16bec32e1ce97a6822b566bf0.jpg)

---

<div class="post-metadata">

**Author:** ![Randy\_Cohen](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/randy_cohen/32/1500_2.png) [@Randy\_Cohen](https://forum.formlabs.com/u/Randy_Cohen)\
**Post date:** [May 19, 2016, 11:23pm UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/64 "2016-05-19T23:23:22Z")

</div>

Sweet! An almost exact clone! 😀

I eschewed the latch, but otherwise mine looks pretty much identical to yours.

---

<div class="post-metadata">

**Author:** ![gregor616](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/gregor616/32/6239_2.png) [@gregor616](https://forum.formlabs.com/u/gregor616)\
**Post date:** [May 28, 2016, 11:25am UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/65 "2016-05-28T11:25:42Z")

</div>

I finished mine, just as my first print was underway. I had to wait for the Jar to show up lucky for me that it was delivered the same day as my resin. This was a great idea, I will cure under water with mine since I hear that yields the best results.

 ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/8/8e178a0ae729a40bd6bbd058e319dc1a12c38eb0.jpg)

---

<div class="post-metadata">

**Author:** ![areffelt](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/areffelt/32/15255_2.png) [@areffelt](https://forum.formlabs.com/u/areffelt)\
**Post date:** [June 15, 2016, 6:35pm UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/66 "2016-06-15T18:35:06Z")

</div>

This was an excellent idea!

I didn’t want to spend extra money on a container, so I picked up one of my coworker’s empty twizzler containers and wrapped it with reflective tape we use for timing rotations (with a laser). The result is pretty cool and it seems to work! (maybe not as well as a cylindrical container)

Thanks a bunch for the idea!

 ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/d/d112939a65e5955605548d9fdf3e04757893da72.jpg)

---

<div class="post-metadata">

**Author:** ![danielsevier](https://avatars.discourse-cdn.com/v4/letter/d/a5b964/32.png) [@danielsevier](https://forum.formlabs.com/u/danielsevier)\
**Post date:** [August 24, 2016, 7:36am UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/67 "2016-08-24T07:36:41Z")

</div>

I made a UV curing box with similar design language as my Form 1. I used MDF, solar powered turntable, orange acrylic, car windshield sun shade, and electronic components from etsy.

([PCB UV Exposure Box 6 X 4 | Etsy UK](https://www.etsy.com/uk/listing/285979473/pcb-uv-exposure-box-6-x-4?ref=shop_home_active_47))

Fun Stuff

 ![](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/2X/1/1176bf5abdfad3e5ca3604d5f87f4367a55bce9f.png)

---

<div class="post-metadata">

**Author:** ![Randy\_Cohen](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/randy_cohen/32/1500_2.png) [@Randy\_Cohen](https://forum.formlabs.com/u/Randy_Cohen)\
**Post date:** [August 24, 2016, 6:35pm UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/68 "2016-08-24T18:35:42Z")

</div>

Nice. You should stack the printer on top of your curing box for maximized artistic effect!

---

<div class="post-metadata">

**Author:** ![logicland](https://avatars.discourse-cdn.com/v4/letter/l/74df32/32.png) [@logicland](https://forum.formlabs.com/u/logicland)\
**Post date:** [October 25, 2016, 11:04am UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/69 "2016-10-25T11:04:02Z")

</div>

Just one thing, glass absorbs UV light [visit here](http://www.physlink.com/education/askexperts/ae603.cfm)

---

<div class="post-metadata">

**Author:** ![JonathanBaker](https://avatars.discourse-cdn.com/v4/letter/j/e9c0ed/32.png) [@JonathanBaker](https://forum.formlabs.com/u/JonathanBaker)\
**Post date:** [October 25, 2016, 9:02pm UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/70 "2016-10-25T21:02:31Z")

</div>

It doesn’t absorb much UVA and violet light though. It mostly absorbs the shorter wavelengths.

---

<div class="post-metadata">

**Author:** ![Thomas\_Asmuth](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/thomas_asmuth/32/7351_2.png) [@Thomas\_Asmuth](https://forum.formlabs.com/u/Thomas_Asmuth)\
**Post date:** [October 25, 2016, 10:32pm UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/71 "2016-10-25T22:32:44Z")

</div>

My version: [http://www.instructables.com/id/Low-Cost-UV-Curing-Box-for-3D-Resin-Prints/](http://www.instructables.com/id/Low-Cost-UV-Curing-Box-for-3D-Resin-Prints/)

---

<div class="post-metadata">

**Author:** ![logicland](https://avatars.discourse-cdn.com/v4/letter/l/74df32/32.png) [@logicland](https://forum.formlabs.com/u/logicland)\
**Post date:** [October 26, 2016, 8:42am UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/72 "2016-10-26T08:42:49Z")

</div>

Indeed you are correct, researching shows its OK to 380nm and we only need 405nm.

---

<div class="post-metadata">

**Author:** ![Drdexter](https://avatars.discourse-cdn.com/v4/letter/d/54ee81/32.png) [@Drdexter](https://forum.formlabs.com/u/Drdexter)\
**Post date:** [January 8, 2017, 6:27am UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/73 "2017-01-08T06:27:59Z")

</div>

I really like this idea it is very simple and has the advantage of being able to do water curing. One thing to note is that if you use anew acrylic/lexan jar that the plastic is a UV absorber and will cut the UV-VIS light by about half at 405 nm. Glass on the other hand has very good transmission down to about 300 nm. So if you want make power/fastest cure time you want a glass jar. I will be making one of these soon and will post mine.

---

<div class="post-metadata">

**Author:** ![3dvs](https://avatars.discourse-cdn.com/v4/letter/3/a183cd/32.png) [@3dvs](https://forum.formlabs.com/u/3dvs)\
**Post date:** [March 9, 2017, 9:16am UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/74 "2017-03-09T09:16:48Z")

</div>

Hello,

Small question regarding curing.

Would something like this work as light source : [http://www.conrad.ch/ce/fr/product/596957/Lampe-UV-E27-89507005-25-W-175-mm?ref=list](http://www.conrad.ch/ce/fr/product/596957/Lampe-UV-E27-89507005-25-W-175-mm?ref=list)  
It’s a “black light” bulb for stage lights, could’nt find the wavelength, but on wikipedia (and other sources) it’s said that black light emits more in the 370 nm with a small peak at 405nm. [https://en.wikipedia.org/wiki/Blacklight](https://en.wikipedia.org/wiki/Blacklight)

Would that work ?

It would be great because I can find bulb like these even with high wattages (up to 400 w) which sould provide enough (even heat certainly).

---

<div class="post-metadata">

**Author:** ![mdrm](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/mdrm/32/7162_2.png) [@mdrm](https://forum.formlabs.com/u/mdrm)\
**Post date:** [March 9, 2017, 12:32pm UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/75 "2017-03-09T12:32:50Z")

</div>

@3dvs  
A light source that peaks at 370nm will post cure much wuicker than a light sources at 405nm (of the same intensity) using current Formlabs resins. The reason that the Formlabs’ devices use 405nm is probably because of several reasons:  
\*It is a wavelength that many resin systems will cure at  
\*405nm led lasers are cheap, much cheaper than UV led lasers (blue laser wavelength, used by many major players in the entertainment industry)  
\*it is not within the UV bands so no UV scare or hazard warning. But never look into any laser please!

There are two things to consider using a tube as a light source:  
\*bulky. It will mostly be much larger than the items that are being cured  
\*after many hours the spectral emmsion pattern and intensity will change, but will still be good for this application.

---

<div class="post-metadata">

**Author:** ![3dvs](https://avatars.discourse-cdn.com/v4/letter/3/a183cd/32.png) [@3dvs](https://forum.formlabs.com/u/3dvs)\
**Post date:** [March 9, 2017, 1:07pm UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/76 "2017-03-09T13:07:55Z")

</div>

@mdrm  
Thanks,  
Main point for looking into tube is that in nearly all threads it’s said that led stripes tend to dim after a while  
Having a different wavelength will still cure correctly ?  
Most uv nail chambers are also around the 365nm, might try one of these first if the shorter wavelength is not a problem.

---

<div class="post-metadata">

**Author:** ![mdrm](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/mdrm/32/7162_2.png) [@mdrm](https://forum.formlabs.com/u/mdrm)\
**Post date:** [March 9, 2017, 1:26pm UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/77 "2017-03-09T13:26:48Z")

</div>

@3dvs  
all ligh sources dimm after time, high quality LEDs have a know fade rate. Industrial LED light source suppliers that say their LEDs will fade less actually age their LEDs for many hundred hours before, so the fade rate is relatively less at the end customer.  
the current curing resin from Formlabs has a wide frequency absorption rate; 405nm is at the one end of the absorption curve. The peak is closer to 365nm (for current Formlabs’ resins)  
Most light sorces give a range, where the peak may be eg 380-400nm. Normally the peak falls towards the longer given frequency, in that example more towards 400nm. Better quality suppliers will supply a spectral curve.

---

<div class="post-metadata">

**Author:** ![mdrm](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/mdrm/32/7162_2.png) [@mdrm](https://forum.formlabs.com/u/mdrm)\
**Post date:** [March 9, 2017, 1:29pm UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/78 "2017-03-09T13:29:04Z")

</div>

@3dvs  
my experience with UV tubes is that the fade rate is rather high, a higher rate than LED (keep the LED below 80°C).  
That is why tanning saloons change their tubes every so often.

---

<div class="post-metadata">

**Author:** ![3dvs](https://avatars.discourse-cdn.com/v4/letter/3/a183cd/32.png) [@3dvs](https://forum.formlabs.com/u/3dvs)\
**Post date:** [March 9, 2017, 1:42pm UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/79 "2017-03-09T13:42:49Z")

</div>

Thanks @mdrm for the infos!

---

<div class="post-metadata">

**Author:** ![alasci](https://avatars.discourse-cdn.com/v4/letter/a/f04885/32.png) [@alasci](https://forum.formlabs.com/u/alasci)\
**Post date:** [March 9, 2017, 5:40pm UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/80 "2017-03-09T17:40:01Z")

</div>

3dvs I bought this [https://www.amazon.com/gp/product/B018C71QHI/ref=oh\_aui\_detailpage\_o05\_s00?ie=UTF8&psc=1](https://www.amazon.com/gp/product/B018C71QHI/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1)

UV curing light, it works well, but it takes a few hours. Just remenber to remove the glass lens from the light before you use it. The glass retards the UV. The light was $50 bucks and I bought a cheap metal filing cabinet, cut a hole in the top, and mounted the ligth with a safety switch at the drawer that cuts off the light when you open the drawer.

---

<div class="post-metadata">

**Author:** ![3dvs](https://avatars.discourse-cdn.com/v4/letter/3/a183cd/32.png) [@3dvs](https://forum.formlabs.com/u/3dvs)\
**Post date:** [March 9, 2017, 8:11pm UTC](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176/81 "2017-03-09T20:11:41Z")

</div>

Thanks @alasci for the link, will check!

[Previous page](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176.md?page=3)

[Next page](https://forum.formlabs.com/t/budget-uv-cure-box-jar/3176.md?page=5)
