# Black colour for Flexible Resin?

**URL:** <https://forum.formlabs.com/t/black-colour-for-flexible-resin/4174>\
**Category:** General Discussion\
**Created:** [April 7, 2015, 3:07pm UTC](https://forum.formlabs.com/t/black-colour-for-flexible-resin/4174 "2015-04-07T15:07:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Diana\_Maryschka](https://avatars.discourse-cdn.com/v4/letter/d/34f0e0/32.png) [@Diana\_Maryschka](https://forum.formlabs.com/u/Diana_Maryschka)\
**Post date:** [April 7, 2015, 3:07pm UTC](https://forum.formlabs.com/t/black-colour-for-flexible-resin/4174/1 "2015-04-07T15:07:38Z")

</div>

Hi,  
Is there a possibility to get the grey Flexible Resin into black ?  
kr  
Diana

---

<div class="post-metadata">

**Author:** ![Paul\_Schommer](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/paul_schommer/32/2592_2.png) [@Paul\_Schommer](https://forum.formlabs.com/u/Paul_Schommer)\
**Post date:** [April 7, 2015, 3:15pm UTC](https://forum.formlabs.com/t/black-colour-for-flexible-resin/4174/2 "2015-04-07T15:15:30Z")

</div>

You may want to look into the MakeJuice pigments mentioned in this thread:

> [@Pigments for colouring the UV resin?](http://forum.formlabs.com/t/pigments-for-colouring-the-uv-resin/4168):
>
> has anyone tried to colourize the UV resin? I need a deep white and a slight milky - greenish colour on my prints. Are there liquid pigments that can be tried? The worst that can happen I guess is that I ruin my resin into my resin tray. Any idea would be very appreciated slight_smile Marcus

I have never used the flexible resin, but I don’t see why it would behave any differently than the other flavors. If I’m reading it correctly, it sounds like the pigment is rather difficult to completely clean out of the tray should you wish to change colors.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [April 21, 2015, 3:15pm UTC](https://forum.formlabs.com/t/black-colour-for-flexible-resin/4174/3 "2015-04-21T15:15:31Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.