# Better representation of over cure in PreForm

**URL:** <https://forum.formlabs.com/t/better-representation-of-over-cure-in-preform/831>\
**Category:** Feature Requests & Ideas\
**Created:** [January 30, 2014, 1:13am UTC](https://forum.formlabs.com/t/better-representation-of-over-cure-in-preform/831 "2014-01-30T01:13:11Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![RocusHalbasch](https://avatars.discourse-cdn.com/v4/letter/r/35a633/32.png) [@RocusHalbasch](https://forum.formlabs.com/u/RocusHalbasch)\
**Post date:** [January 30, 2014, 1:13am UTC](https://forum.formlabs.com/t/better-representation-of-over-cure-in-preform/831/1 "2014-01-30T01:13:11Z")

</div>

Currently PreForm color codes generated supports and bases. It would be nice if it would also color code over cure. This way if I’m printing something straight to the platform I can see from the color in the outlines which parts of the print will be over cured and therefore less detailed. I know this is just the first two millimeters but a visual cue in the software would be nice.
