# Best tips for post processing elastic 50 A parts

**URL:** <https://forum.formlabs.com/t/best-tips-for-post-processing-elastic-50-a-parts/44226>\
**Category:** General Discussion\
**Created:** [April 22, 2025, 6:52pm UTC](https://forum.formlabs.com/t/best-tips-for-post-processing-elastic-50-a-parts/44226 "2025-04-22T18:52:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![sarava](https://avatars.discourse-cdn.com/v4/letter/s/3bc359/32.png) [@sarava](https://forum.formlabs.com/u/sarava)\
**Post date:** [April 22, 2025, 6:52pm UTC](https://forum.formlabs.com/t/best-tips-for-post-processing-elastic-50-a-parts/44226/1 "2025-04-22T18:52:33Z")

</div>

Just wondering if i can clean my parts made with elastic 50A V2 resin with WD-40? if i dont have mineral oil at hand

---

<div class="post-metadata">

**Author:** ![MattRForerunner](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/mattrforerunner/32/20355_2.png) [@MattRForerunner](https://forum.formlabs.com/u/MattRForerunner)\
**Post date:** [April 22, 2025, 7:11pm UTC](https://forum.formlabs.com/t/best-tips-for-post-processing-elastic-50-a-parts/44226/2 "2025-04-22T19:11:32Z")

</div>

never heard of using mineral oil i use IPA and wash for 10 mins then soak for ten in fresh clean ipa then let dry for a hour and cure in a bowl with water

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [October 22, 2025, 7:11am UTC](https://forum.formlabs.com/t/best-tips-for-post-processing-elastic-50-a-parts/44226/3 "2025-10-22T07:11:43Z")

</div>

Closed on October 22, 2025, 7:11am UTC

This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.