# Banding on Prints **URL:** \ **Category:** Support & Troubleshooting\ **Created:** [February 11, 2022, 9:50pm UTC](https://forum.formlabs.com/t/banding-on-prints/33220 "2022-02-11T21:50:44Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Futurescape3D](https://avatars.discourse-cdn.com/v4/letter/f/87869e/32.png) [@Futurescape3D](https://forum.formlabs.com/u/Futurescape3D)\ **Post date:** [February 11, 2022, 9:50pm UTC](https://forum.formlabs.com/t/banding-on-prints/33220/1 "2022-02-11T21:50:44Z")
![IMG-0420 (1)](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/9/9/99776f2de8e5ff2123d2fb4636d64350db11588a.jpeg) We’ve cleaned our printers to remove dust on the glass, which is a very painstaking process. However, we’re still seeing some serious layer lines/banding on prints regardless of the orientation of the model on the build plate. Any advice? ![IMG-0420 (1)](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/9/9/99776f2de8e5ff2123d2fb4636d64350db11588a.jpeg) ---
**Author:** ![JasonITB](https://avatars.discourse-cdn.com/v4/letter/j/e0b2c6/32.png) [@JasonITB](https://forum.formlabs.com/u/JasonITB)\ **Post date:** [February 13, 2022, 8:41pm UTC](https://forum.formlabs.com/t/banding-on-prints/33220/2 "2022-02-13T20:41:14Z")
Was there any cups detected inside of preform? That looks almost like its fdm. Maybe try printing it tilted or changing the layer thickness ---
**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\ **Post date:** [August 15, 2022, 8:41am UTC](https://forum.formlabs.com/t/banding-on-prints/33220/3 "2022-08-15T08:41:40Z")
Closed on August 15, 2022, 8:41am UTC This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.