# BAD URLs - please correct. Formum images not resolving

**URL:** <https://forum.formlabs.com/t/bad-urls-please-correct-formum-images-not-resolving/10783>\
**Category:** Support & Troubleshooting\
**Created:** [December 5, 2016, 3:05pm UTC](https://forum.formlabs.com/t/bad-urls-please-correct-formum-images-not-resolving/10783 "2016-12-05T15:05:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ChristopherBarr](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/christopherbarr/32/645_2.png) [@ChristopherBarr](https://forum.formlabs.com/u/ChristopherBarr)\
**Post date:** [December 5, 2016, 3:05pm UTC](https://forum.formlabs.com/t/bad-urls-please-correct-formum-images-not-resolving/10783/1 "2016-12-05T15:05:55Z")

</div>

[@Formlabs](https://forum.formlabs.com/groups/formlabs)

> [@Adjusting the galvos for better accuracy; success!](http://forum.formlabs.com/t/adjusting-the-galvos-for-better-accuracy-success/810/1):
>
> \<update 18th Feb - Shane Mans suggestion of using photopaper works very well, my y-axis galvo (x-axis still ok-ish) has become very unstable, and I was able to tune it in under 1/2 hour, instead of 4 days! although of course the first time documented underneath involved a lot of learning. See my 18th Feb update below for details on a much faster way\> Hi All, You may have seen my other posts complaining about the Form1 dimensional error. My first printer was out in the X-axis by over 3% compres…

All image links @ above url are borken…

---

<div class="post-metadata">

**Author:** ![Frew](https://avatars.discourse-cdn.com/v4/letter/f/c0e974/32.png) [@Frew](https://forum.formlabs.com/u/Frew)\
**Post date:** [December 5, 2016, 4:30pm UTC](https://forum.formlabs.com/t/bad-urls-please-correct-formum-images-not-resolving/10783/2 "2016-12-05T16:30:30Z")

</div>

Looks like the issue is local to that thread and images everywhere else on the forums are resolving. Let me know if you’re seeing otherwise. I’ve sent this over to our web team to look into.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [December 19, 2016, 4:30pm UTC](https://forum.formlabs.com/t/bad-urls-please-correct-formum-images-not-resolving/10783/3 "2016-12-19T16:30:42Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.