# Bad resin spill, on glass, help!

**URL:** <https://forum.formlabs.com/t/bad-resin-spill-on-glass-help/19985>\
**Category:** Form 2\
**Created:** [August 9, 2018, 2:41pm UTC](https://forum.formlabs.com/t/bad-resin-spill-on-glass-help/19985 "2018-08-09T14:41:41Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![janeyqz](https://avatars.discourse-cdn.com/v4/letter/j/71e660/32.png) [@janeyqz](https://forum.formlabs.com/u/janeyqz)\
**Post date:** [August 9, 2018, 2:41pm UTC](https://forum.formlabs.com/t/bad-resin-spill-on-glass-help/19985/1 "2018-08-09T14:41:41Z")

</div>

We are hoping to clean up the spill - would you have any recommendations?

Photo is here: [[https://www.dropbox.com/s/nx9wb0dswwi4qzy/Photo%20Aug%2008%2C%2010%2053%2014%20PM.jpg?dl=0](https://www.dropbox.com/s/nx9wb0dswwi4qzy/Photo%20Aug%2008%2C%2010%2053%2014%20PM.jpg?dl=0)]

([https://www.dropbox.com/s/nx9wb0dswwi4qzy/Photo%20Aug%2008%2C%2010%2053%2014%20PM.jpg?dl=0](https://www.dropbox.com/s/nx9wb0dswwi4qzy/Photo%20Aug%2008%2C%2010%2053%2014%20PM.jpg?dl=0))

---

<div class="post-metadata">

**Author:** ![JohnHue](https://avatars.discourse-cdn.com/v4/letter/j/48db29/32.png) [@JohnHue](https://forum.formlabs.com/u/JohnHue)\
**Post date:** [August 9, 2018, 3:03pm UTC](https://forum.formlabs.com/t/bad-resin-spill-on-glass-help/19985/2 "2018-08-09T15:03:56Z")

</div>

Contact support they’ll help you out pretty quick 😉

The glass has a seal so normally the risk of having resin inside the printer is pretty low. You’ll have to remove the glass eventually to clean is properly but before doing that you should clean as much resin as possible. If your Form2 is still under warranty, do **not** remove the torx screws without Formlabs telling you to do so !

---

<div class="post-metadata">

**Author:** ![DKirch](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/dkirch/32/20300_2.png) [@DKirch](https://forum.formlabs.com/u/DKirch)\
**Post date:** [August 9, 2018, 3:50pm UTC](https://forum.formlabs.com/t/bad-resin-spill-on-glass-help/19985/3 "2018-08-09T15:50:15Z")

</div>

Hey there,

Just to confirm what John rightly said above me, please contact our support team ASAP at the link below and we’ll be happy to do whatever we can to get you back to printing!

Sorry to hear about your spill but we’ll get that sorted out for you. 🙂

> **[New Request](https://support.formlabs.com/hc/en-us/articles/115001299290)**
>
> Get an Instant Answer
>  
> 
>  
> 
> Contact Us
> Ready to contact our Support team?Send an email or chat with us:
> Submit a request Learn about our various support plans
> 
>  
>  

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [August 16, 2018, 3:50pm UTC](https://forum.formlabs.com/t/bad-resin-spill-on-glass-help/19985/4 "2018-08-16T15:50:21Z")

</div>

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.